Service Tools
Show/hide table
| Tools with a 1/4" Drive |
| Description |
| 1/4" Drive Socket Wrench |
| 1/4" Drive Torque Wrench 5 in-lbs to 125 in-lbs |
| 1/4" Socket |
| 3/8" Socket |
| 7/16" Socket |
| 3" Extension |
| 6" Extension |
Show/hide table
| Tools with a 3/8" Drive |
| Description |
| 3/8" Drive Socket Wrench |
| 3/8" Drive Torque Wrench 5 to 125 ft-lbs |
| 1/4" Deep Socket |
| 3/8" Deep Socket |
| 7/16" Deep Socket |
| 1/2" Deep Socket |
| 9/16" Deep Socket |
| 3/4" Deep Socket |
| 1" Deep Socket |
| 3" Extension |
| 6" Extension |
| 12" Extension |
Show/hide table
| Tools with a 1/2" Drive |
| Description |
| 1/2" Drive Socket Wrench |
| 1-1/8" Deep Socket |
Show/hide table
| Wrenches |
| 5/16" Open End/Box |
| 3/8" Open End/Box |
| 7/16" Open End/Box |
| 1/2" Open End/Box |
| 9/16" Open End/Box |
| 5/8" Open End/Box |
| 11/16" Open End/Box |
| 3/4" Open End/Box |
| 1-1/16" Open End/Box |
| 1-1/2" Open End/Box |
| 1 1/8" Open End/Box (cut short) |
Show/hide table
| Hex (Allen) Wrenches |
| 7/64" (for RPS sensor) |
| 3/16" (for transformer removal) |
| 5/16" (for door) |
| 5/32" (for FC IGBT and DC capacitors) |
| 5 mm (for capacitors on FW IGBT) |
Show/hide table
| Hex Sockets |
| 1/4" (for load cell) |
| 5/16" |
| 10 mm (for K3 and K4 removal) |
Show/hide table
| General List of Tooling |
| Set of Phillips head screwdrivers |
| Set of flat head screwdrivers |
| Drop light |
| Inspection mirror |
| Magnet |
| Lock-Tite (262) |
| Wire strippers 10 - 18 AWG |
| Terminal crimpers 10 - 18 AWG |
| Fuse puller small/large |
| Safety glasses |
| Electrical safety gloves - inner (class "O" rubber) |
| Electrical safety gloves - outer (12" leather) |
| Depth micrometer or vernier caliper |
| AC/DC Current Probe (Fluke 80i - 110s or equivalent) |
| 3000 Amp Current Probe Clamp (Fluke 3000i or equivalent) |
| Oscilloscope |
| Digital multi meter (Fluke 87 or equivalent) and deluxe test lead set |
| AMP pin extractor (Micro, Mini, Large) - (MFG #189727-1 (mini)) |
| Electrostatic discharge (ESD) wrist strap |
| USB to RS-232 adapter |
| Medium strength Loctite |
| Low strength Loctite |
Caterpillar Information System:
UPS 750 Uninterruptible Power Supply System Shutdown
UPS 750 Uninterruptible Power Supply System Startup
UPS 750 Uninterruptible Power Supply Front Screen and Air Filter
UPS 750 Uninterruptible Power Supply Door
UPS 750 Uninterruptible Power Supply Field Coil Driver
UPS 750 Uninterruptible Power Supply Accelerometer
UPS 750 Uninterruptible Power Supply Cooling Fan
UPS 750 Uninterruptible Power Supply Vacuum Pump
UPS 750 Uninterruptible Power Supply Vacuum Gauge
UPS 750 Uninterruptible Power Supply Rotor Position Sensor Assembly
UPS 750 Uninterruptible Power Supply Flywheel Assembly
UPS 750 Uninterruptible Power Supply Flywheel Interface PWA
UPS 750 Uninterruptible Power Supply Flywheel Module - Remove
UPS 750 Uninterruptible Power Supply Flywheel Module - Install
UPS 750 Uninterruptible Power Supply Flywheel Power Unit Cabinet - Install
UPS 750 Uninterruptible Power Supply System Messages
C4.4 Engines for Caterpillar Built Machines Crankcase Breather - Install - Unfiltered Breather
C4.4 Engines for Caterpillar Built Machines Crankcase Breather - Remove - Filtered Breather
C4.4 Engines for Caterpillar Built Machines Crankcase Breather - Install - Filtered Breather
G3500 Generator Sets Declaration of Conformity
UPS 750 Uninterruptible Power Supply General Information (SIO Cabinet)
C4.4 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
C4.4 Engines for Caterpillar Built Machines Flow Control Valve - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install - Single Secondary Fuel Filter