Electric Starting Motor - Remove and Install
- Disconnect harness assemblies (1) and (2).
- Attach a suitable lifting device to electric starting motor (3). The weight of electric starting motor (3) is approximately
37 kg (82 lb) . - Remove bolts (4). Remove electric starting motor (3). Remove the gasket from the joint between electric starting motor (3) and the flywheel housing.
- Repeat Step 2 and Step 3 for the remaining electric starting motor.
Show/hide table
 |
|
Disconnect batteries before performance of any service work. |
Note: Before disconnecting the harness assemblies, mark the items for the proper connections in order to ensure correct assembly.
Show/hide table
| |
| Illustration 1 | g03659641 |
- Install electric starting motors (3) in the reverse order of removal.
Caterpillar Information System:
3512C HD and 3516C HD IPP Rental Power Modules Component Location
Cat® Command For Hauling MID 039 - CID 3454 - FMI 06
Cat® Command For Hauling MID 039 - CID 3454 - FMI 03
Cat® Command For Hauling MID 039 - CID 3434 - FMI 14
Cat® Command For Hauling MID 039 - CID 3434 - FMI 09
390F Excavator Machine Systems Control Manifold (Pilot Oil) - Assemble
Cat® Command For Hauling MID 039 - CID 1893 - FMI 02
Procedures for Verification of TH48-E80 Petroleum Transmission (Frac) Transmission Controls{3166, 3167} Procedures for Verification of TH48-E80 Petroleum Transmission (Frac) Transmission Controls{3166, 3167}
3500B Engines for Caterpillar Built Power Modules Radiator Mounting
3500B Engines for Caterpillar Built Power Modules Radiator Mounting
Cat® Command For Hauling MID 039 - CID 1603 - FMI 14
Cat® Command For Hauling MID 039 - CID 1603 - FMI 09
390F Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate and Connect
C3.3B and C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive
3512B Petroleum Engine Maintenance Interval Schedule
VIMS Configuration Files for PLE640 are Downloaded as ".CFG" Instead of ".cfg"{7601, 7606} VIMS Configuration Files for PLE640 are Downloaded as ".CFG" Instead of ".cfg"{7601, 7606}
C4.4 Marine Generator Set Boost Pressure Sensor
C4.4 Marine Generator Set Inlet Manifold Temperature Sensor
C4.4 Marine Generator Set Belt Guard
C4.4 Industrial Engine Reference Information
C4.4 Industrial Engine Product Storage
2014/06/30 Reman Pump and Motor Reference Chart {5058, 5070}
3500B Engines for Caterpillar Built Power Modules Temperature Sensor (Exhaust)
3500B Engines for Caterpillar Built Power Modules Cylinder Head Valves