390F Excavator Machine Systems Caterpillar


Control Manifold (Pilot Oil) - Assemble

Usage:

390F B37

组装步骤


注意

保持所有零件清洁无杂质。

液压系统被异物污染会缩短液压系统部件的使用寿命。

为了避免污染物进入液压系统,总要在断开后塞住或盖住管路、管接头或软管。 罩住已解体的部件,然后在组装前正确清洁它们。

在更换任何主部件后,或特别是在部件故障后,正确清洁液压系统,以便去除全部污染物。





    图 1g03659463

  1. 安装 O 形密封圈 (6) 。 安装电磁阀 (7) 和螺栓 (8) 。 拧紧螺栓 (8) 至扭矩为 7 ± 1 N·m (62 ± 9 lb in)。

  1. 对于其余的电磁阀,重复步骤 1。



    图 2g03659371

  1. 安装适配器组件 (5) 。



    图 3g03659364

  1. 安装适配器组件 (4) 和 (3) 。



    图 4g03659356

  1. 安装板 (1) 和螺栓 (2) 。

End By: 安装先导控制歧管。

Caterpillar Information System:

Cat® Command For Hauling MID 039 - CID 1893 - FMI 02
Procedures for Verification of TH48-E80 Petroleum Transmission (Frac) Transmission Controls{3166, 3167} Procedures for Verification of TH48-E80 Petroleum Transmission (Frac) Transmission Controls{3166, 3167}
3500B Engines for Caterpillar Built Power Modules Radiator Mounting
3500B Engines for Caterpillar Built Power Modules Radiator Mounting
Cat® Command For Hauling MID 039 - CID 1603 - FMI 14
Cat® Command For Hauling MID 039 - CID 1603 - FMI 09
Cat® Command For Hauling MID 039 - CID 1326 - FMI 02
Cat® Command For Hauling MID 039 - CID 1273 - FMI 14
Cat® Command For Hauling MID 039 - CID 1273 - FMI 09
Cat® Command For Hauling MID 039 - CID 1089 - FMI 09
Cat® Command For Hauling MID 039 - CID 0967 - FMI 09
Cat® Command For Hauling MID 039 - CID 0800 - FMI 09
Cat® Command For Hauling MID 039 - CID 3434 - FMI 09
Cat® Command For Hauling MID 039 - CID 3434 - FMI 14
Cat® Command For Hauling MID 039 - CID 3454 - FMI 03
Cat® Command For Hauling MID 039 - CID 3454 - FMI 06
3512C HD and 3516C HD IPP Rental Power Modules Component Location
3512C Engine Electric Starting Motor - Remove and Install
390F Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate and Connect
C3.3B and C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive
3512B Petroleum Engine Maintenance Interval Schedule
VIMS Configuration Files for PLE640 are Downloaded as ".CFG" Instead of ".cfg"{7601, 7606} VIMS Configuration Files for PLE640 are Downloaded as ".CFG" Instead of ".cfg"{7601, 7606}
C4.4 Marine Generator Set Boost Pressure Sensor
C4.4 Marine Generator Set Inlet Manifold Temperature Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.