3500B Engines for Caterpillar Built Power Modules Caterpillar

Cylinder Head Valves

Usage:

PM3508 BLM

Show/hide table




Illustration 1	g02829216

Show/hide table

Table 1
Specification for 7E-8758 Cylinder Head Gp
Item	Qty	Part	Specification Description
1	4	316-5976 Spring	Length under test force is 60.29 mm (2.374 inch). Test force is 460 ± 23 N (103 ± 5 lb). Free length after test is 74.8 mm (2.94 inch).
2	4	316-5977 Spring	Length under test force is 57.5 mm (2.26 inch). Test force is 248.0 ± 12.4 N (55.8 ± 2.8 lb). Free length after test is 71.4 mm (2.81 inch).
3	2	316-5980 Valve Stem Seal	Install the valve stem seal to the inlet valves. Before assembly, coat with engine oil.
4	2	316-5981 Washer	Install the washer to the exhaust valves.
A	-	-	Height from the top of the cylinder head to the top of the valve guides is 26.0 ± 1.0 mm (1.02 ± 0.04 inch).
5	2	197-6995 Valve Guide	Bore of the exhaust valve guide after installation is 12.619 ± 0.025 mm (0.4968 ± 0.0010 inch).
6	2	133-9306 Valve Guide	Bore of the inlet valve guide after installation is 9.487 ± 0.025 mm (0.3735 ± 0.0010 inch).
7	2	443-2712 Exhaust Valve	Before assembly, coat the exhaust valve stems with clean engine oil. Stem diameter (B) is 12.464 ± 0.025 mm (0.4907 ± 0.0010 inch). Valve diameter (D) is 56.00 ± 0.15 mm (2.205 ± 0.006 inch). Face angle is 44.40 ± 0.25 degrees.
8	2	210-2542 Inlet Valve	Before assembly, coat the inlet valve stems with clean engine oil. Stem diameter (C) is 9.441 ± 0.010 mm (0.3717 ± 0.0004 inch). Valve diameter (E) is 56.00 ± 0.15 mm (2.205 ± 0.006 inch). Face angle is 19.40 ± 0.25 degrees.
9	2	130-2608 Valve Seat Insert	Diameter of exhaust valve seat insert is 60.119 ± 0.015 mm (2.3669 ± 0.0006 inch). Bore in the cylinder head is 60.000 ± 0.025 mm (2.3622 ± 0.0010 inch). Face angle is 45.00 ± 0.25 degrees.
10	2	130-2607 Valve Seat Insert	Diameter of inlet valve seat insert is 60.627 ± 0.015 mm (2.3869 ± 0.0006 inch). Bore in the cylinder head is 60.508 ± 0.025 mm (2.3822 ± 0.0010 inch). Face angle is 20.00 ± 0.25 degrees.

Caterpillar Information System:

3500B Engines for Caterpillar Built Power Modules Temperature Sensor (Exhaust)

2014/06/30 Reman Pump and Motor Reference Chart {5058, 5070}

C4.4 Industrial Engine Product Storage

C4.4 Industrial Engine Reference Information

C4.4 Marine Generator Set Belt Guard

C4.4 Marine Generator Set Inlet Manifold Temperature Sensor

C4.4 Marine Generator Set Boost Pressure Sensor

VIMS Configuration Files for PLE640 are Downloaded as ".CFG" Instead of ".cfg"{7601, 7606} VIMS Configuration Files for PLE640 are Downloaded as ".CFG" Instead of ".cfg"{7601, 7606}

3512B Petroleum Engine Maintenance Interval Schedule

C3.3B and C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive

390F Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate and Connect

3512C Engine Electric Starting Motor - Remove and Install

3500B Engines for Caterpillar Built Power Modules Exhaust Manifold

C9.3 Marine Auxiliary Engines Engine Oil Sample - Obtain

3512C Engine Electronic Control Module (Engine) - Remove and Install

2014/05/07 Customer Wiring and Caterpillar® Electronic Technician (ET) Configuration for Kershaw Variable Pitch Software on Certain C32 Industrial Engines {1901, 1920}

C32 Tier 4 Final Marine Engines Fuel Priming Pump

3500B Engines for Caterpillar Built Power Modules Fan Drive

C175-16 Petroleum Engines Turbocharger Oil Lines

3500B High Displacement Crankcase Breather

2014/04/11 A New Oil Fill Tube and Oil Level Gauge Is Used on Certain C32 Marine Engines {1316, 1326}

2014/11/14 New Bolts and Washers Are Used in the Dosing Cabinet of Certain 3516C Engines {108K, 3206, 7553}

3512C Engine Fuel Filter Housing - Remove

A 3516-17 Code Is Logged on Certain 3516C Heavy Duty and C175-16 Tier 4 Interim Generator Sets{1000, 1920, 775E} A 3516-17 Code Is Logged on Certain 3516C Heavy Duty and C175-16 Tier 4 Interim Generator Sets{1000, 1920, 775E}