Fuel Filter Housing - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Shut OFF the fuel supply to the engine.
Show/hide table
Illustration 1 g03661018 - Disconnect tube assembly (2).
- Attach a suitable lifting device onto fuel filter housing (1). The weight of fuel filter housing (1) is approximately
30 kg (66 lb) . - Remove eight bolts (3) and remove fuel filter housing (1).
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Caterpillar Information System:
2014/11/14 New Bolts and Washers Are Used in the Dosing Cabinet of Certain 3516C Engines {108K, 3206, 7553}
2014/04/11 A New Oil Fill Tube and Oil Level Gauge Is Used on Certain C32 Marine Engines {1316, 1326}
3500B High Displacement Crankcase Breather
C175-16 Petroleum Engines Turbocharger Oil Lines
3500B Engines for Caterpillar Built Power Modules Fan Drive
C32 Tier 4 Final Marine Engines Fuel Priming Pump
2014/05/07 Customer Wiring and Caterpillar® Electronic Technician (ET) Configuration for Kershaw Variable Pitch Software on Certain C32 Industrial Engines {1901, 1920}
3512C Engine Electronic Control Module (Engine) - Remove and Install
C9.3 Marine Auxiliary Engines Engine Oil Sample - Obtain
3500B Engines for Caterpillar Built Power Modules Exhaust Manifold
3500B Engines for Caterpillar Built Power Modules Cylinder Head Valves
3500B Engines for Caterpillar Built Power Modules Temperature Sensor (Exhaust)
A 3516-17 Code Is Logged on Certain 3516C Heavy Duty and C175-16 Tier 4 Interim Generator Sets{1000, 1920, 775E} A 3516-17 Code Is Logged on Certain 3516C Heavy Duty and C175-16 Tier 4 Interim Generator Sets{1000, 1920, 775E}
Cat® Command For Hauling MID 039 - CID 3456 - FMI 04
Cat® Command For Hauling MID 039 - CID 3456 - FMI 05
Cat® Command For Hauling MID 039 - CID 3458 - FMI 03
Cat® Command For Hauling MID 039 - CID 3458 - FMI 04
Cat® Command For Hauling MID 039 - CID 3458 - FMI 20
Cat® Command For Hauling MID 039 - CID 3458 - FMI 21
Cat® Command For Hauling MID 039 - CID 3556 - FMI 09
Retrofitting for Low Emissions on Certain G3516 1400 RPM Engines {775E} Retrofitting for Low Emissions on Certain G3516 1400 RPM Engines {775E}
Cat® Command For Hauling MID 039 - CID 3588 - FMI 02
Cat® Command For Hauling MID 039 - CID 3588 - FMI 09
Cat® Command For Hauling MID 039 - CID 3588 - FMI 12