C4.4 Marine Generator Set Caterpillar


Water Pump - Inspect

Usage:

C4.4 NRP
Неизправна водна помпа може да причини сериозни проблеми с прегряването на двигателя, които могат да доведат до следните състояния:

  • Пукнатини в цилиндровата глава

  • Блокиране на бутало

  • Друга потенциална повреда на двигателя


Илюстрация 1g01904773
(A) Дренажен отвор
(B) Отвеждащ отвор

Бележка Уплътненията на водната помпа се смазват от охладителната течност в системата. Появяването на малък теч е нормално. Вижте илюстрацията 1 за позицията на дренажния отвор и отвора за обезвъздушаване.

Огледайте водната помпа за течове.

Бележка Ако охладителна течност на двигателя навлезе в системата за смазване на двигателя, маслото за смазване и филтърът за двигателното масло трябва да се сменят. Тази смяна на филтъра и двигателното масло премахва замърсяване, причинено от охладителната течност. Това действие предотвратява и неправилните проби от маслото.

Водната помпа не подлежи на техническо обслужване. За монтажа на нова водна помпа вижте Ръководство за разглобяване и сглобяване, "Водна помпа – демонтиране и монтиране".

Caterpillar Information System:

C9.3 Marine Propulsion Engine Model View Illustrations
C9.3 Marine Propulsion Engine Safety Messages
C9.3 Marine Propulsion Engine Maintenance Interval Schedule - B and C rated engines
C4.4 Marine Generator Set Turbocharger - Inspect
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Electrical Power Supply - Test
2014/03/28 A New Installation Process Is Used for Valve Stem Seals in Certain C13 Industrial Engines {1100, 1104, 1105}
C8.7 Marine Engines Lubrication System
C8.7 Marine Engines Fuel System
C8.7 Marine Engines Electronic Control System Components
390F Excavator Machine Systems Boom - Remove and Install
C4.4 Marine Generator Set Alarms and Shutoffs
C11 and C13 Industrial Engines Maintenance Interval Schedule - Engines Which Have Deep Oil Pans
2014/03/28 New Software Is Used on Certain G3600 Petroleum Engines {1901, 1920}
C3.3 and C4.4 Rental Generator Sets Alternator - Inspect
DE Series Generator Set With Cat C4.4 Engine Belts - Inspect/Adjust/Replace
DE Series Generator Set With Cat C4.4 Engine Belt Tensioner - Check - Poly V-Belt
Thickness of the 102-5861 Thrust Plate Is Out of Specification on Certain 3400 Series Commercial and Machine Engines{1210} Thickness of the 102-5861 Thrust Plate Is Out of Specification on Certain 3400 Series Commercial and Machine Engines{1210}
3512C HD and 3516C HD IPP Rental Power Modules Fuel Filter Is Restricted
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Starting - Test
3512C HD and 3516C HD IPP Rental Power Modules Fuel Pressure Is Low - Diesel System
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Speed/Timing - Test
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Sensor Supply - Test
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Sensor Signal (PWM) - Test
3512C HD and 3516C HD IPP Rental Power Modules Intake Manifold Air Temperature Is High
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.