349F and 352F Excavators Machine System Specifications Caterpillar


Fuel Tank

Usage:

352F-VG A9J


Illustration 1g03630819
Typical example

Table 1
Item  Qty  Part  Specification Description 
349-7059 Fuel Cap As  Torque to 0.6 to 1.0 N·m (5.3 to 8.9 lb in)
10  Screw  Torque to 1.4 ± 0.1 N·m (12.4 ± 0.9 lb in)
Apply blue Loctite High Flex GM to the flange seal surface. 
3B-0551 Pipe Plug  Apply black Loctite gasket maker to the threads. 

Caterpillar Information System:

UPS 750 Uninterruptible Power Supply System Configuration
390F Excavator Engine Front Mount - Remove and Install
2014/05/16 New Software Is Used on Certain Tier 4 Interim Industrial Engines {1901, 1902, 1920}
374F Excavator Alternate Exit
390F Excavator Water Pump - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Manual Hydraulic Valve - Health Check
3500 Generator Sets with Dynamic Gas Blending Gas Filter Condensation - Drain
390F Excavator C18 Engine Supplement Turbocharger - Remove and Install
Autonomous Calibration Procedure for Off-Highway Trucks Equipped with the Command Package {7008, 7605, 79AU} Autonomous Calibration Procedure for Off-Highway Trucks Equipped with the Command Package {7008, 7605, 79AU}
C3.4B Engines Speed/Timing - Test
C4.4 Marine Generator Set Sensors and Electrical Connectors
CX35 On-Highway Transmission Maintenance Interval Schedule
349F and 352F Excavators Machine System Specifications Suction Fan
390F Excavator Refrigerant Compressor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Gear Group (Rear) - Remove
390F Excavator C18 Engine Supplement Manifold (DEF Heater) - Remove and Install
2014/02/26 An Improved Engine Oil Filter Element Is Used for Certain C175 Commercial Engines {1308}
390F Excavator Enclosure (Cooling System Package) - Remove and Install
390F Excavator Aftercooler - Remove and Install
374F Excavator Leaving the Machine
349F and 352F Excavators Machine System Specifications Pilot Lines
390F Excavator Hydraulic Oil Cooler - Remove and Install - Rear
390F Excavator Hydraulic Oil Cooler - Remove and Install - Front
374F Excavator Machine Systems BLCV and SLCV - Calibrate - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.