Fuel Cooler - Remove and Install
Start By:
- Remove the fan.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
- Disconnect the batteries.
- Turn the fuel supply to the OFF position.
Show/hide table
Illustration 1 g03422601 - Disconnect hose assembly (1) and hose assembly (2).
Show/hide table
Illustration 2 g03422602 - Remove nut (3) and nut (5). Discard O-ring seal (4) and O-ring seal (6).
Show/hide table
Illustration 3 g03422603 - Remove bolt (7). Remove fuel cooler (8).
- Install fuel cooler (8) in the reverse order of removal.
Caterpillar Information System:
C13T-TH35 and C15T-TH35 Petroleum Packages Coolant (ELC) - Change
C13T-TH35 and C15T-TH35 Petroleum Packages Coolant (DEAC) - Change
C15 and C18 Engines for China On-Highway Phase IV Cooling Fan Speed - Test
C13 Generator Set Engine Radiator Top Tank - Remove and Install
C13 Generator Set Engine Radiator and Aftercooler - Assemble
C13 Generator Set Engine Radiator and Aftercooler - Disassemble
C4.4 Industrial Engine Engine Operation
794 AC Off-Highway Truck Rollover Protective Structure (ROPS) - Inspect
794 AC Off-Highway Truck Radiator Core and Aftercooler - Clean
794 AC Off-Highway Truck Power Generator - Inspect/Test
C15 and C18 Engines for China On-Highway Phase IV Oil Pressure Is Low
C15 and C18 Engines for China On-Highway Phase IV Intake Manifold Air Temperature Is High
C13T-TH35 and C15T-TH35 Petroleum Packages Breather (Transmission Tank) - Clean
C13T-TH35 and C15T-TH35 Petroleum Packages Maintenance Interval Schedule
2013/10/28 New Seal Kits Are Available to Service the Flexible Generator Couplings Used on Certain C175-16 Locomotive and Petroleum Engines {3252}
C13T-TH35 and C15T-TH35 Petroleum Packages Torque Converter and Transmission Oil - Change
C15 and C18 Industrial Engines Product Lifting
C15 and C18 Engines for China On-Highway Phase IV Diagnostic Trouble Codes
3500 Engines Pistons and Connecting Rods - Remove
C4.4 Industrial Engine Stopping the Engine
C4.4 Industrial Engine After Stopping Engine
C4.4 Industrial Engine Refill Capacities
C7.1 Engines Flywheel Housing - Remove and Install - Standard Housing
3500 Engines Pistons and Connecting Rods - Install