C13 Generator Set Engine Caterpillar

Assembly Procedure

Show/hide table

Illustration 1	g03422002

1. Use two people to install radiator (20). The weight of radiator (20) is approximately 27 kg (60 lb).

2. Install radiator (20), bolts (29), and bolts (30).
   Show/hide table

   Illustration 2	g03422001

3. Use two people to install aftercooler (22). The weight of aftercooler (22) is approximately 39 kg (86 lb).

4. Install aftercooler (22), bolts (27), and bolts (28).
   Show/hide table

   Illustration 3	g03421999

5. Position support assembly (21) and install bolts (24) and bolts (25) in aftercooler assembly (22).

6. Install bolts (23) and bolts (26) in radiator assembly (20).
   Show/hide table

   Illustration 4	g03421998

7. Position shroud assembly (19) and install bolts (18).
   Show/hide table

   Illustration 5	g03421997

   Show/hide table

   Illustration 6	g03421996

8. Position fuel cooler assembly (17) and Install bolt (16).
   Show/hide table

   Illustration 7	g03421995

9. Install nuts (13).

10. Install hose (15) and clamp (14).
    Show/hide table

    Illustration 8	g03421994

11. Install O-ring seal (12) on radiator top tank (5).

12. Install cap (11) and clamp (10) on radiator top tank (5).

13. Apply Tooling (A) on O-ring seal (12) before installing radiator top tank (5).
    Show/hide table

    Illustration 9	g03421993

    Show/hide table

    Illustration 10	g03421992

14. Position radiator top tank (5) and install bolts (9) and bolts (8).

15. Install hose (7) and clamp (6).
    Show/hide table

    Illustration 11	g03421991

16. Position shroud assembly (2) and install bolts (1).

17. Install hose (4) and radiator cap assembly (3).

End By:

1. Install the radiator and aftercooler.