A New Pre-Lube System Is Used On Certain 3508 Industrial Engines Used In Fire Pump Applications {1307, 1319}
- Engine:
- 3508 (S/N: 95Y1-UP)
Description of Change: A new pre-lube system is available for certain 3508 Industrial Engines.
Adaptable To: The new 436-0562 Prelubrication Oil Pump Gp and 113-4238 Prelubrication Lines Gp are used to keep the oil system filled to the pressure side of turbochargers. Using the new pre-lube system will prevent the turbochargers from achieving high temperatures at engine start-up. The lower temperatures at start-up ensure that the compressor wheel does not rub the compressor housing.
The new parts listed in Table 2 and Table 2 are adaptable back to first production of the engines listed above.
The new parts are effective with serial numbers 95Y1474-UP.
Show/hide table
Illustration 1 | g03418915 |
436-0562 Prelubrication Oil Pump Gp |
Show/hide table
Illustration 2 | g03418919 |
113-4238 Prelubrication Lines Gp |
Show/hide table
436-0562 Prelubrication Oil Pump Gp     | |
---|---|
Qty     | Part     |
1     | 0L-1325 Washer     |
2     | 1N-3872 Support     |
1     | 1W-4257 Bracket As     |
1     | 2G-6303 Seal     |
1     | 2G-6304 Strainer     |
1     | 2H-1258 Electrical Box     |
1     | 2H-1259 Box Door Cover     |
1     | 2W-3406 Switch Support     |
1     | 3N-4579 Hose As     |
1     | 3N-6935 Check Valve     |
2     | 3R-1059 Flange     |
2     | 4B-1243 Screw     |
3     | 6N-8744 Mount     |
1     | 7K-1181 Cable Strap     |
1     | 7L-5219 Relay     |
1     | 9G-2653 Hose As     |
1     | 9W-5215 Hose As     |
1     | 113-5787 Bracket As     |
1     | 132-8759 Pressure Switch     |
1     | 199-2813 Pump Harness As     |
1     | 425-5935 Tube As     |
1     | 441-0375 Gear Pump Assembly     |
1     | 441-0373 Motor As     |
1     | 003-2143 Elbow     |
1     | 004-6683 Fitting     |
    | 004-7626 Connector     |
2     | 0S-1571 Bolt     |
2     | 0S-1588 Bolt     |
7     | 0S-1594 Bolt     |
2     | 0S-1608 Bolt     |
4     | 1A-5822 Bolt     |
4     | 1B-9575 Bolt     |
4     | 1M-3381 Spacer     |
1     | 214-7568 O-Ring Seal     |
2     | 2B-2695 Bolt     |
1     | 2N-3378 Flared Elbow     |
3     | 3B-4502 Lockwasher     |
2     | 3B-4503 Lockwasher     |
1     | 3R-5387 Connector     |
3     | 4B-1227 Screw     |
1     | 4S-6399 Connector     |
1     | 5D-9231 Connector     |
8     | 5M-2894 Hard Washer     |
2     | 5P-5846 O-Ring Seal     |
1     | 5P-9617 Adapter     |
1     | 6B-4661 Reducer Bushing     |
1     | 6V-5048 O-Ring Seal     |
2     | 8M-0547 Flared Elbow     |
1     | 8M-0755 Adapter     |
3     | 9L-9132 Washer     |
6     | 9M-1974 Hard Washer     |
1     | 9M-7357 Coupling As     |
2     | 9X-6458 Hard Washer     |
3     | 5L-2579 Grommet     |
Show/hide table
113-4238 Prelubrication Lines Gp     | |
---|---|
Qty     | Part     |
1     | 2D-7325 Pipe Tee     |
1     | 031-1030 Hose As     |
1     | 113-8147 Valve     |
1     | 113-8149 Cover As     |
1     | 210-6619 Hose As     |
1     | 272-0759 Seal     |
1     | 365-4216 Turbocharger Adapter     |
1     | 032-1267 Connector     |
1     | 0S-0509 Bolt     |
1     | 2R-6276 Connector     |
1     | 3B-7745 Pipe Nipple     |
1     | 3D-2824 O-Ring Seal     |
1     | 4S-6399 Connector     |
1     | 4S-6678 Connector     |
1     | 5M-2894 Hard Washer     |
1     | 5P-9464 Elbow     |
2     | 6V-4368 O-Ring Seal     |
1     | 8M-2773 Clip     |
1     | 8T-6763 Pipe Plug     |
Caterpillar Information System:
C13 Generator Set Engine Water Temperature Regulator - Remove and Install
C13 Generator Set Engine Water Pump - Remove and Install
3500 Engines Turbocharger - Install
3500 Engines Turbocharger - Remove
C13 Generator Set Engine Exhaust Manifold - Remove and Install
C7.1 Industrial Engine Injector (Diesel Exhaust Fluid) - Replace
349F and 352F Excavators Leaving the Machine
C15 and C18 Engines for China On-Highway Phase IV Diagnostic Capabilities
2013/09/20 A New and Improved Switch and Contactor Are Used for the Jacket Water Heater Control on Certain 3512C Engines {1383, 1408, 1408}
C7.1 Industrial Engine Diesel Exhaust Fluid - Fill
2013/09/16 New Wiring Harness Film Is Used for the Pre-lubrication Pump on Certain G3500 Engines {1319, 1408}
3500 Engines Engine Oil Cooler - Assemble
2013/11/08 New V Band Clamps and Mounting Hardware Are Used on Certain 3512C Engines {1059, 1071, 7553}
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valves
CAT WDS OEM and 777F Off-Highway Truck/Tractor Water Delivery System Gear Pump (Charge) - Remove and Install
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Combined Function - Electric Control
Site Positioning Requirements for Cat® MineStar System Products {7605} Site Positioning Requirements for Cat® MineStar System Products {7605}
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Piston Pump (Water Delivery) - Remove and Install
C4.4 Industrial Engine Emissions Certification Film
3500 Engines Engine Oil Cooler - Remove
3500 Engines Engine Oil Cooler - Install
2013/09/02 A New Bolt and Washer that Improves Durability of the Idler Transfer Gear is Used on Certain TH48-E70 Petroleum Transmissions {1234}
Air Conditioning and Heating R134a for All Caterpillar Machines Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
Air Conditioning and Heating R134a for All Caterpillar Machines Automatic Temperature Control System (ECM Controlled) Troubleshooting