Turbocharger
Show/hide table
Illustration 1 | g03369736 |
Show/hide table
Illustration 2 | g03369740 |
Bolt tightening sequence for 6V-6753 High Temperature Bolt |
Show/hide table
Specification for 379-5341 Turbocharger Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 8     | 125-5375 Bolt     | Torque to 40 ± 3 N·m (30 ± 2 lb ft).     |
2     | 8     | 6V-6753 High Temperature Bolt     | Before assembly, apply Loctite C5A copper Anti-Seize to threads and bearing surfaces. Use the following procedure in order to tighten the bolts : 1. Tighten the bolts (1) in any sequence to 54 ± 5 N·m (40 ± 4 lb ft). 2. Tighten the bolts (2) in any sequence to 54 ± 5 N·m (40 ± 4 lb ft).     |
3     | 8     | ||
4     | 16     | 369-3458 High Temperature Bolt     | Before assembly, apply Loctite C5A copper Anti-Seize to threads and bearing surfaces.     |
Torque to 40 ± 3 N·m (30 ± 2 lb ft). |
|||
5     | 8     | 310-2233 Flange Nut     | Before assembly, apply Loctite C5A copper Anti-Seize to threads and bearing surfaces. Turbo-exhaust manifold joint tightening procedure: 1. Align joint to get all four flange nuts started on the bolts. 2. Snug up all bolts on the joint. 3. Tighten the bolt (1) to 54 ± 5 N·m (40 ± 4 lb ft). 4. Tighten the bolt (1) on diagonally apposite to 54 ± 5 N·m (40 ± 4 lb ft). 5. Tighten remaining the bolts (2) to 54 ± 5 N·m (40 ± 4 lb ft). 6. Repeat procedure steps 3-5 to verify that bolts tighten to 54 ± 5 N·m (40 ± 4 lb ft).     |
Caterpillar Information System:
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Transmission Planetary - Assemble
G3512H and G3516H Generator Set Engines Accessory Drive (Front) - Disassemble
374F Excavator Hydraulic System Electronic Control (Main Control Valve)
374F Excavator Hydraulic System General Information (Main Control Valve)
374F Excavator Hydraulic System Boom Cylinder
C280-16 Engine Emergency Stopping
C280 Marine, Marine Auxiliary, and Petroleum Engines Manual Stop Procedure
C280 Marine, Marine Auxiliary, and Petroleum Engines Starting the Engine
UPS 750 Uninterruptible Power Supply Maintenance Interval Schedule
C32 Generator Set Additional Messages
UPS 750 Uninterruptible Power Supply User Interface for System Cabinet
UPS 750 Uninterruptible Power Supply Symbols - Safety Symbols and Labels
C13, C15, and C18 Tier 4 Final Engines Exhaust Combustion (ARD)
3500B Generator Set Engines Radiator
C9.3 Tier 4 Final Engines Exhaust Combustion (ARD)
C9.3 Tier 4 Final Engines Exhaust Lines (DPF Inlet)
C9.3 Tier 4 Final Engines Camshaft
3500B Locomotive Engines Air Lines
C9.3 Tier 4 Final Engines Piston and Rings
C9.3 Tier 4 Final Engines Temperature Sensor (DPF Inlet, Flame Detect)
C9.3 Tier 4 Final Engines Diesel Particulate Filter
C9.3 Tier 4 Final Engines Diesel Particulate Filter
C4.4 and C7.1 Engines Idle Validation - Test
C9.3 Tier 4 Final Engines Diesel Particulate Filter