3500 Engines Caterpillar


Engine Oil Pan

Usage:

3516C GBZ


Illustration 1g03368031

Table 1
Specification for 381-3901 Oil Pan Gp 
Item  Qty  Part  Specification Description 
7E-2630 Oil Pan Gasket  Before assembly, apply red Loctite 596 to both sides of the gasket joints. 
38  5P-5855 Bolt  After assembly, as required apply green Loctite 290 to the open top end of the bolt holes of the oil pan. 
1A-2029 Bolt  Use the following procedure in order to tighten the bolts:

1. First tighten the bolts (3) to standard torque.
2. Tighten the bolts (4) in a numerical sequence 1 to 10 as shown in Illustration 1 to a standard torque. 
10 


Illustration 2g03368470

Table 2
Item  Qty  Part  Specification Description 
3P-0654 O-Ring Seal  Before assembly, lubricate the bore lightly with the lubricant that is being sealed. 
5P-5700 O-Ring Seal  Before assembly, lubricate the bore lightly with the lubricant that is being sealed. 
6V-4315 O-Ring Seal  Before assembly, lubricate the bore lightly with the lubricant that is being sealed. 
4B-2363 Oil Drain Plug  Torque to 145 ± 15 N·m (107 ± 11 lb ft)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.