Gear Group (Rear)
Show/hide table
| |
| 图 1 | g03367954 |
|
典型示例 | |
Show/hide table
| 354-1325 后齿轮总成、 354-1326 后齿轮总成、 354-1327 后齿轮总成和 354-1329 后齿轮总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 160-8184 衬套 | 外径为 |
| 厚度为 |
|||
| 安装深度为 |
|||
| 2 | 12 | 1A-2029 螺栓 | 装配前，根据需要在螺纹上涂抹蓝色 Loctite 242。 |
| 3 | 1 | 236-4415 惰轮组件 | 安装后， 152-7254 衬套的孔径为 |
| 轴承中的安全阀必须与齿轮中的安全阀对齐，偏差在 2 度以内。 | |||
| 轴承不得伸出齿轮任一表面。 | |||
| 4 | 2 | 239-0770 轴惰轮 | 外径为 |
| 5 | 1 | 236-4414 惰轮组件 | 安装后， 152-7254 衬套的孔径为 |
| 轴承不得伸出齿轮任一表面。 | |||
| 6 | 1 | 6V-3319 O 形密封圈 | 组装前，用密封的液体稍稍润滑孔。 |
| 7 | 1 | 4N-0684 定位销 | 延伸长度为 |
Caterpillar Information System:
C9.3 Tier 4 Final Engines Engine Oil Pan
C9.3 Tier 4 Final Engines Exhaust Lines (DPF Inlet)
3500 Engines Flywheel Housing Cover
C9.3 Tier 4 Final Engines Air Lines
C9.3 Tier 4 Final Engines Turbocharger
C13 Tier 4 Final Engines Valve Rocker Arm
C13 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
C11 and C13 Engines Fuel Temperature Sensor
C280-16 Engine Control Panel
24M Motor Grader Braking and Hydraulic Fan System Brake Release Pump and Motor (Parking and Secondary)
2013/05/08 An Improved Wiring Harness Is Used for Certain C9.3, C13, C15, and C18 Commercial Engines {1408}
C3.3B Engines for Caterpillar Built Machines Fumes Disposal Filter - Remove and Install
C4.4 and C7.1 Engines Glow Plug Starting Aid - Test
C9.3 Tier 4 Final Engines Water Lines
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (NRS Differential)
3512C Petroleum Engines with Dynamic Gas Blending Diagnostic Trouble Codes
C13 Tier 4 Final Engines Air Cleaner
3500 Engines Engine Oil Pan
C13 Tier 4 Final Engines Air Cleaner
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Lines
C13 Tier 4 Final Engines Wiring (Jacket Water Heater)
C13, C15, and C18 Tier 4 Final Engines Water Lines
2013/09/27 A New Turbocharger Group Is Available for Certain C13 Truck Engines {1052, 1053}
C13 Tier 4 Final Engines Wiring (Jacket Water Heater)