C11 and C13 Engines Caterpillar


Fuel Temperature Sensor

Usage:

730C2 2L7



图 1g03367910

表 1
145-7028 温度传感器总成 的技术规格    
项目     数量     零件     技术规格说明    
1     1     145-7028 螺栓     最终安装扭矩为
6 ± 1 N·m (53 ± 9 lb in)。    
-     -     -     工作温度为
−40 至 150 °C (−40 至 302 °F)。    
-     -     -     输出类型为无源。    

Caterpillar Information System:

C280-16 Engine Control Panel
24M Motor Grader Braking and Hydraulic Fan System Brake Release Pump and Motor (Parking and Secondary)
2013/05/08 An Improved Wiring Harness Is Used for Certain C9.3, C13, C15, and C18 Commercial Engines {1408}
C3.3B Engines for Caterpillar Built Machines Fumes Disposal Filter - Remove and Install
2013/04/12 New UPSB505 Firmware is Now Available in SIS {4480, 7620}
2013/05/02 New Product Link Software for PL121 and PL300 Is Now Available for All Cat® Products {7606, 7610, 7620}
C3.3B Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
G3512H and G3516H Generator Set Engines Accessory Drive (Front) - Remove and Install - Lower
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Engine Shutdown Occurrence
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Intake Manifold Air Temperature Is High
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Fuel Filter Is Restricted
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Engine Overspeeds
C13 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
C13 Tier 4 Final Engines Valve Rocker Arm
C9.3 Tier 4 Final Engines Turbocharger
C9.3 Tier 4 Final Engines Air Lines
3500 Engines Flywheel Housing Cover
C9.3 Tier 4 Final Engines Exhaust Lines (DPF Inlet)
C9.3 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear)
C4.4 and C7.1 Engines Glow Plug Starting Aid - Test
C9.3 Tier 4 Final Engines Water Lines
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (NRS Differential)
3512C Petroleum Engines with Dynamic Gas Blending Diagnostic Trouble Codes
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.