C9.3 Tier 4 Final Engines Caterpillar


Turbocharger

Usage:

D6T 2B3


Illustration 1g03367943

Table 1
Specification for 345-8982 Turbocharger Gp 
Item  Qty  Part  Specification Description 
375-2467 Flange Locknut  Before assembly, lubricate the threads and bearing surfaces with Loctite C5A Copper Anti-Seize.
Torque to 70 ± 5 N·m (52 ± 4 lb ft)


Illustration 2g03367944

Table 2
Item  Qty  Part  Specification Description 
239-5858 Compressor Clamp Assembly  Tighten the compressor clamp assembly to 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)
361-7980 Band Clamp  Use the following procedure in order to tighten the turbine clamp assembly:

1. Tighten to 18.0 ± 1.6 N·m (159.3 ± 14.2 lb in).
2. Loosen by 1 to 2 turns.
3.Again, tighten to 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.