Engine Oil Pan
Show/hide table
Illustration 1 | g03323786 |
Show/hide table
Illustration 2 | g03323787 |
View of area A |
Show/hide table
Specification for 324-0020 Oil Pan Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 6V-3835 O-Ring Seal | Before assembly, lightly lubricate the bore with 5P-3975 Rubber Lubricant. |
2 | 2 | 269-7886 O-Ring Seal | Before assembly, lightly lubricate the bore with 5P-3975 Rubber Lubricant. |
- | - | - | Before you install engine oil pan to the engine cylinder block, apply Loctite RTV Silicone Clear sealant to each joint in the oil pan seal. Application of sealant at each joint should be to both sides of the seal and across the entire width of the joint. Apply sealant to T joint locations at the front housing and at the rear housing |
Caterpillar Information System:
Inspection and Cleaning Procedure For Certain Uninterruptible Power Supplies{4480} Inspection and Cleaning Procedure For Certain Uninterruptible Power Supplies{4480}
3516B Engine Overhaul (Top End)
3516B Engine Water Temperature Regulators - Remove
2013/06/19 An Improved Air Conditioner Condenser Fan Motor is Available for Certain Excavators {1805}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Shutoff - Test
CG137-08 and CG137-12 Engines Turbocharger - Remove and Install - G3408B
G3500 A3 Engines Air/Fuel Ratio Control - Adjust - NO<SUB>X</SUB> Feedback
3516B Engine Fuel Injector - Check
421-9725 Top End Engine Overhaul Foundational Kit for 3412E Marine Engines{1000} 421-9725 Top End Engine Overhaul Foundational Kit for 3412E Marine Engines{1000}
421-9723 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 421-9723 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
CG137-08 and CG137-12 Engines Aftercooler - Remove and Install - G3408B
CG137-08 and CG137-12 Engines Rotary Actuator (Carburetor) - Remove and Install - G3408B
C1.5 and C2.2 Industrial Engines Solenoid Valve - Test
C175-16 Marine Engine Flywheel
C175-16 Marine Engine Engine Harness
C175-16 Marine Engine Engine Harness
2012/12/21 New Sequence for Adjusting the Fuel Injectors in 3516, 3516B, and 3516C Engines {1290}
TA2 Inspection for C175-16 and C175-20 Engines{1000} TA2 Inspection for C175-16 and C175-20 Engines{1000}
C175-16 Marine Engine Generator Coupling
C27 and C32 Industrial Engines Coolant (ELC) - Change
421-9726 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 421-9726 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain C175-16 Generator Sets{1050, 1091} Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain C175-16 Generator Sets{1050, 1091}
3516B Engine Water Temperature Regulators - Install
Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B Engines{1250, 1280} Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B Engines{1250, 1280}