3516B Engine Caterpillar


Safety Messages

Usage:

3516B TRE
There may be several specific safety messages on your engine. The exact location and a description of the messages are reviewed in this section. Please become familiar with all of the messages.

Ensure that all of the messages are legible. Clean the messages or replace the messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap for cleaning the messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. The messages that are loosened could drop off the engine.

Replace any message that is damaged or missing. If a message is attached to a part of the engine that is replaced, install a new message on the replacement part. Your Caterpillar dealer can provide new messages.

------ WARNING! ------

Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.




Illustration 1g03317672


Illustration 2g03317732

Universal Warning (1)



Illustration 3g01370904

Safety message is located on the first and the last cylinder on each side of 1, 2, 15, and 16 cylinder engines.

------ WARNING! ------

Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Cat dealer for replacement manuals. Proper care is your responsibility.


Hot Surface Warning (2)



Illustration 4g01372256

Safety message is located on the cylinder 3 and cylinder 4.

------ WARNING! ------

Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.


Hot Surface Warning (3)



Illustration 5g01384734

Safety message is located on the right side on the oil cooler above the dipstick. The other safety message is located on the crankcase cover near the midline of the engine.

------ WARNING! ------

Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.


Caterpillar Information System:

C27 and C32 Generator Sets Coolant Temperature Regulator - Replace
3512B SR4B Generator Sets Safety Messages
C1.5 and C2.2 Industrial Engines Engine Valve Lash - Check
C1.5 and C2.2 Industrial Engines Diesel Particulate Filter - Clean/Replace
3500B and 3500C Marine Engines Exhaust Manifold
C1.5 and C2.2 Industrial Engines Coolant Sample (Level 2) - Obtain
C1.5 and C2.2 Industrial Engines Coolant Sample (Level 1) - Obtain
C1.5 and C2.2 Industrial Engines Coolant Level - Check
C1.5 and C2.2 Engines for Caterpillar Built Machines Flywheel Housing
C1.5 and C2.2 Industrial Engines Coolant Extender (ELC) - Add
3500C Marine Engines Turbocharger
C1.5 and C2.2 Industrial Engines Coolant (ELC) - Change
3176C and 3196 Marine Engines Starting the Engine
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230} 420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
2012/12/19 A New Fuel Filter Base Assembly Is Used on C175 Generator Set Engines {1261}
C1.5 and C2.2 Industrial Engines Engine Oil Level - Check
C1.5 and C2.2 Industrial Engines Engine Oil and Filter - Change
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft Pulley
2013/04/22 New Exhaust Valve Stem Seals and Rotocoils Are Available for Certain 3500B and 3500C Pleasure Craft Engines {1100}
3176C and 3196 Marine Engines Fumes Disposal Filter Element - Replace
3516B Engine Coolant - Change
3516C Locomotive Engine Fire Prevention and Explosion Prevention
3516B Engine Engine Speed/Timing Sensor - Clean/Inspect
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Oil Pressure Is Low
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.