Flywheel Housing
Show/hide table
| |
| Illustration 1 | g01442020 |
|
Typical example | |
(1) Tighten the setscrews for the back plate to the following torque. ...
(2) Tighten the setscrews for the flywheel housing to the following torque. ...
Caterpillar Information System:
C1.5 and C2.2 Industrial Engines Coolant Extender (ELC) - Add
3500C Marine Engines Turbocharger
C1.5 and C2.2 Industrial Engines Coolant (ELC) - Change
C1.5 and C2.2 Industrial Engines Coolant (DEAC) - Change
C32 Marine Engines Coolant Level - Test
C32 Marine Engine Oil Temperature Is High
C32 Marine Engine Oil Pressure Is Low
C32 Marine Engine Oil Contains Coolant
3176C and 3196 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
3512B SR4B Generator Sets Model View Illustrations
C32 Marine Engine Inlet Air Temperature Is High
3176C and 3196 Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace - Air Cleaner Element and Vacuum Regulator Filters
C1.5 and C2.2 Industrial Engines Coolant Level - Check
C1.5 and C2.2 Industrial Engines Coolant Sample (Level 1) - Obtain
C1.5 and C2.2 Industrial Engines Coolant Sample (Level 2) - Obtain
3500B and 3500C Marine Engines Exhaust Manifold
C1.5 and C2.2 Industrial Engines Diesel Particulate Filter - Clean/Replace
C1.5 and C2.2 Industrial Engines Engine Valve Lash - Check
3512B SR4B Generator Sets Safety Messages
C27 and C32 Generator Sets Coolant Temperature Regulator - Replace
3516B Engine Safety Messages
3176C and 3196 Marine Engines Starting the Engine
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230} 420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
2012/12/19 A New Fuel Filter Base Assembly Is Used on C175 Generator Set Engines {1261}