Engine Speed/Timing Sensor - Clean/Inspect
Show/hide table
Illustration 1 | g03317333 |
Primary speed/timing sensor (1) and Secondary speed/timing sensor (2) |
- Remove the speed/timing sensors from the front housing. Check the condition of the plastic end of the speed/timing sensors for wear and/or contaminants.
- Clean the metal shavings and other debris from the face of the speed/timing sensors.
- Install the sensors.
Caterpillar Information System:
3512B SR4B Generator Sets Model View Illustrations
C32 Marine Engine Inlet Air Temperature Is High
3176C and 3196 Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace - Air Cleaner Element and Vacuum Regulator Filters
3176C and 3196 Marine Engines Belts - Inspect/Adjust/Replace
3176C and 3196 Marine Engines Fluid Recommendations
C32 Marine Engine Fuel Temperature Is High
C4.4 Industrial Engine Severe Service Application
3176C and 3196 Marine Engines Transmission Operation
3176C and 3196 Marine Engines Configuration Parameters - Customer Specified Parameters
C32 Marine Engine Fuel Pressure Is Low
3176C and 3196 Marine Engines Product Lifting
3176C and 3196 Marine Engines Plate Locations and Film Locations
C32 Marine Engine Oil Contains Coolant
C32 Marine Engine Oil Pressure Is Low
C32 Marine Engine Oil Temperature Is High
C32 Marine Engines Coolant Level - Test
C1.5 and C2.2 Industrial Engines Coolant (DEAC) - Change
C1.5 and C2.2 Industrial Engines Coolant (ELC) - Change
3500C Marine Engines Turbocharger
C1.5 and C2.2 Industrial Engines Coolant Extender (ELC) - Add
C1.5 and C2.2 Engines for Caterpillar Built Machines Flywheel Housing
C1.5 and C2.2 Industrial Engines Coolant Level - Check
C1.5 and C2.2 Industrial Engines Coolant Sample (Level 1) - Obtain
C1.5 and C2.2 Industrial Engines Coolant Sample (Level 2) - Obtain