Coolant Level - Check
Check the coolant level when the engine is stopped and cool.
Show/hide table
Illustration 1 | g00285520 |
Cooling system filler cap |
Show/hide table
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. |
- Remove the cooling system filler cap slowly in order to relieve pressure.
- Maintain the coolant level within
13 mm (0.5 inch) of the bottom of the filler pipe. If the engine is equipped with a sight glass, maintain the coolant level to the proper level in the sight glass.Show/hide tableIllustration 2 g02590196 Typical filler cap gaskets - Clean the cooling system filler cap and check the condition of the filler cap gaskets. Replace the cooling system filler cap if the filler cap gaskets are damaged. Reinstall the cooling system filler cap.
- Inspect the cooling system for leaks.
Caterpillar Information System:
C1.5 and C2.2 Engines for Caterpillar Built Machines Flywheel Housing
C1.5 and C2.2 Industrial Engines Coolant Extender (ELC) - Add
3500C Marine Engines Turbocharger
C1.5 and C2.2 Industrial Engines Coolant (ELC) - Change
C1.5 and C2.2 Industrial Engines Coolant (DEAC) - Change
C32 Marine Engines Coolant Level - Test
C32 Marine Engine Oil Temperature Is High
C32 Marine Engine Oil Pressure Is Low
C32 Marine Engine Oil Contains Coolant
3176C and 3196 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
3512B SR4B Generator Sets Model View Illustrations
C32 Marine Engine Inlet Air Temperature Is High
C1.5 and C2.2 Industrial Engines Coolant Sample (Level 1) - Obtain
C1.5 and C2.2 Industrial Engines Coolant Sample (Level 2) - Obtain
3500B and 3500C Marine Engines Exhaust Manifold
C1.5 and C2.2 Industrial Engines Diesel Particulate Filter - Clean/Replace
C1.5 and C2.2 Industrial Engines Engine Valve Lash - Check
3512B SR4B Generator Sets Safety Messages
C27 and C32 Generator Sets Coolant Temperature Regulator - Replace
3516B Engine Safety Messages
3176C and 3196 Marine Engines Starting the Engine
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230} 420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
2012/12/19 A New Fuel Filter Base Assembly Is Used on C175 Generator Set Engines {1261}
C1.5 and C2.2 Industrial Engines Engine Oil Level - Check