New 1U9139 Universal Fuel Line Pickup Available
Usage:
The new 1U9139 Universal Fuel Line Pickup is available. This fuel line pickup can be used with the 6V6113 Amplifier and 6V2100 Multitach to determine diesel engine speed. The 1U9139 Universal Fuel Line Pickup replaces the 6V6114 Fuel Line Pickup. The former pickup could only be used on 5.5 mm (.21 ") diameter fuel lines. The new universal pickup can be used on fuel lines from 5.5 to 7.9 mm (.21 to .28 ") in diameter.
New 1U9139 Universal Fuel Line Pickup.
Caterpillar Information System:
1988/05/01 New Diaphragm For Brakesaver Control Valve
1988/05/01 New Components Used In Water Lines Groups
1988/05/01 Ways To Prevent Overcooling Of 3306B (63Z, 76R) Truck Engines
1988/04/01 Remanufactured Cylinder Heads For 3406 Engines
1988/04/01 List of Service Publications
1988/04/01 Extraction Tools For "Live Oil Sampling "
1988/04/01 Stepped Compression Ring Temporarily Used
1988/04/01 Former Exhaust Valve Bridge For Jacobs Brake ® Interferes With 40 mm Nozzle Adapter; New Bridge Used
1988/03/01 Updated Executive Program Module Available For The 8T8697 Electronic Control Analyzer Programmer (ECAP)
1988/03/01 Updated 8C5919 3406B PEEC Service Program Module Available
1988/03/01 New 1U6602 Tachometer Group Available
1988/03/01 Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/05/01 New 1U8115 Generator Test Lead Set With Insulated Tips
1988/05/01 List of Service Publications
1988/06/01 Maintenance-Free Batteries Require Different Troubleshooting Procedures
1988/06/01 Reusability Guidelines For Phosphate/Oil-Coated And Zinc-Plated Fasteners
1988/06/01 Lubricant Supplement Lists Specifications For CXP Lubricants
1988/06/01 Installation Of Valves For Live Oil Sampling
1988/06/01 Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01 Piston Application Guide
1988/06/01 Software Upgrade For The 8T5282 Digital Diagnostic Tool (DDT)
1988/06/01 New Crankshaft Damper Has Rubber Bonded To Hub And Ring
1988/07/01 Vehicle Speed Calibration Can Be Corrected Without Knowing Number Of Transmission Chopper Teeth
1988/07/01 Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group