Flywheel
Show/hide table
| |
| Illustration 1 | g03134597 |
Show/hide table
| Specification for 362-0127 Flywheel Gp | |||
| Item | Qty | Part Number | Specification Description |
| 1 | - | - | When you install the flywheel group, align the dash mark on the flywheel with the dash mark on the crankshaft. |
| 2 | 20 | 6V-5605 Bolt | Use the following procedure to tighten the bolts: 1. Before assembly, lubricate the threads and bearing surface with 4C-5591 Anti-Seize Compound. 2. Torque to 3. Tighten to an additional turn of 85 to 92 degrees. |
Caterpillar Information System:
C9 On-highway Engines ARD Temperature Is Low
C9 On-highway Engines ARD Failed to Ignite
C7 and C9 On-Highway Engines Diesel Particulate Filter Collects Excessive Soot
C9 On-highway Engines ARD Combustion - Test
C13, C15, and C18 Tier 4 Final Engines DEF Pressure Is High
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
C4.4 Industrial Engine Fuel System Secondary Filter - Replace
C4.4 Industrial Engine Fuel System Primary Filter/Water Separator - Drain
C4.4 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
C6.6 Industrial Engine Engine Crankcase Breather Element - Replace
C9.3 Industrial Engine Turbocharger
C7.1 Industrial Engine Maintenance Interval Schedule
C280-16 Petroleum Engine Flywheel
C7.1 Industrial Engine Engine Oil Level - Check
Handling and Unpacking Instructions for the Uninterruptible Power Supply{4480} Handling and Unpacking Instructions for the Uninterruptible Power Supply{4480}
C7.1 Industrial Engine Engine - Clean
C7.1 Industrial Engine Electrical System
2012/07/31 A New Charging Alternator Group Is Available for Certain C15 and C18 Industrial Engines {1405}
2012/07/19 A New Procedure Is Used to Secure the Fuel Injection Lines Group on Certain 3412, 3412C, and 3412D Commercial Engines {1252, 1254}
2012/11/07 Improved Fuel Lines Groups Are Used on Certain C18 Marine Engines {1274}
C32 Auxiliary Engine Engine Oil Level - Check
C18 Marine Engine Engine Oil Level Gauge - Calibrate
3608 Engine Fuel Injection Lines - Mechanical Unit Injection
2012/07/27 New Fuel System Components are Used on Certain C175 Engines {1252}