Fuel Injection Lines - Mechanical Unit Injection
Show/hide table
Illustration 1 | g03137962 |
Show/hide table
Illustration 2 | g03137960 |
View of section (A-A) |
Show/hide table
3606 Engine 1W-0824 Fuel Injection Lines Gp Specifications | |||
Item | Qty | Part | Specification Description |
1 | 11 | 6V-8639 Connector | Torque to |
2 | 1 | 9S-8005 O-Ring Plug | |
3 | 1 | 6V-8782 Tee | |
4 | 12 | 268-1522 Connector | |
5 | 1 | 4B-3611 Square Head Setscrew | Adjust bolt height to provide Engine must be at rated load and speed |
Lubricate threads of setscrew (1) and bore of valve body after installation of the retainer and the seal. | |||
6 | 1 | 5T-2760 Spring | Length under test force........................................... |
Test force..................................................................... |
|||
Free length after test.............................................. |
|||
Outside diameter.................................................... |
|||
7 | 1 | 9K-1242 Connector | Torque to |
8 | 1 | 3P-1156 O-Ring Seal | Lubricate seal lightly with clean diesel fuel |
Show/hide table
3608 Engine 1W-0856 Fuel Injection Lines Gp Specifications | |||
Item | Qty | Part | Specification Description |
1 | 15 | 6V-8639 Connector | Torque to |
2 | 1 | 9S-8005 O-Ring Plug | |
3 | 1 | 6V-8782 Tee | |
4 | 16 | 268-1522 Connector | |
5 | 1 | 4B-3611 Square Head Setscrew | Adjust bolt height to provide Engine must be at rated load and speed |
Lubricate threads of setscrew (1) and bore of valve body after installation of the retainer and the seal. | |||
6 | 1 | 5T-2760 Spring | Length under test force........................................... |
Test force..................................................................... |
|||
Free length after test.............................................. |
|||
Outside diameter.................................................... |
|||
7 | 1 | 9K-1242 Connector | Torque to |
8 | 1 | 3P-1156 O-Ring Seal | Lubricate seal lightly with clean diesel fuel |
Caterpillar Information System:
C18 Marine Engine Engine Oil Level Gauge - Calibrate
C32 Auxiliary Engine Engine Oil Level - Check
2012/11/07 Improved Fuel Lines Groups Are Used on Certain C18 Marine Engines {1274}
2012/07/19 A New Procedure Is Used to Secure the Fuel Injection Lines Group on Certain 3412, 3412C, and 3412D Commercial Engines {1252, 1254}
2012/07/31 A New Charging Alternator Group Is Available for Certain C15 and C18 Industrial Engines {1405}
C7.1 Industrial Engine Electrical System
C7.1 Industrial Engine Engine - Clean
Handling and Unpacking Instructions for the Uninterruptible Power Supply{4480} Handling and Unpacking Instructions for the Uninterruptible Power Supply{4480}
C7.1 Industrial Engine Engine Oil Level - Check
C280-16 Petroleum Engine Flywheel
C280-16 Petroleum Engine Flywheel
C9 On-highway Engines ARD Temperature Is Low
2012/07/27 New Fuel System Components are Used on Certain C175 Engines {1252}
C13, C15, and C18 Tier 4 Final Engines DEF Does Not Purge
Retrofitting for the Dynamic Gas Blending Capability on Certain 3512C Oil Well Service Engines{1250, 1280} Retrofitting for the Dynamic Gas Blending Capability on Certain 3512C Oil Well Service Engines{1250, 1280}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electrical Power Supply - Test
G3500 Engines Temperature Switch
3516B Generator Set Engines with Dynamic Gas Blending Oil Pressure Is Low
C18 Marine Auxiliary and Marine Generator Set Engines Coolant Contains Oil
C280-16 Petroleum Engine Camshaft
C175-16 and C175-20 Generator Set Engines Stub Shaft (Front)
C7.1 Industrial Engine Basic Engine
C7.1 Industrial Engine Glossary of Electronic Control Terms
3606 and 3608 Engines Fuel Injection Lines - Heavy Fuel Oil