2012/07/27 Caterpillar


New Fuel System Components are Used on Certain C175 Engines {1252}

Usage:

C175-16 P6L
Generator Set:
C175-16 (S/N: WYB1-UP)
Engine:
C175-16 (S/N: P6L1-UP)

Description of Change: The improved block and tube assembly feature a new design and materials that increase the service life of the parts. The new design also prevents the capability of installing the tube into the block incorrectly. The tube will only fit into the block one direction.

Adaptable To: The new parts listed in Table 1 are adaptable back to first production of the engines listed above.

The new parts are effective with the following serial numbers:

  • P6L01000-UP

  • WYB01000-UP

Table 1
Parts List    
New Pt. No.     Former Pt. No.    
360-1595 Tube As     346-3311 Fuel Filter Element    
360-1596 Block     351-8680 Fuel Filter Housing As    



Illustration 1g03135736



Illustration 2g03135782

View of section (A-A)

(1) 360-1596 Block

(2) 360-1595 Tube As




Illustration 3g03140351

Section view of 360-1596 Block, 360-1595 Tube As installed correctly.

(1) 360-1596 Block

(2) 360-1595 Tube As




Illustration 4g03140357

Section view of 360-1596 Block, 360-1595 Tube As installed incorrectly.

(A) 0.5 mm (0.0197inch) step to prevent the tube being installed incorrectly.

(1) 360-1596 Block

(2) 360-1595 Tube As

Caterpillar Information System:

3608 Engine Fuel Injection Lines - Mechanical Unit Injection
C18 Marine Engine Engine Oil Level Gauge - Calibrate
C32 Auxiliary Engine Engine Oil Level - Check
2012/11/07 Improved Fuel Lines Groups Are Used on Certain C18 Marine Engines {1274}
2012/07/19 A New Procedure Is Used to Secure the Fuel Injection Lines Group on Certain 3412, 3412C, and 3412D Commercial Engines {1252, 1254}
2012/07/31 A New Charging Alternator Group Is Available for Certain C15 and C18 Industrial Engines {1405}
C7.1 Industrial Engine Electrical System
C7.1 Industrial Engine Engine - Clean
Handling and Unpacking Instructions for the Uninterruptible Power Supply{4480} Handling and Unpacking Instructions for the Uninterruptible Power Supply{4480}
C7.1 Industrial Engine Engine Oil Level - Check
C280-16 Petroleum Engine Flywheel
C280-16 Petroleum Engine Flywheel
C13, C15, and C18 Tier 4 Final Engines DEF Does Not Purge
Retrofitting for the Dynamic Gas Blending Capability on Certain 3512C Oil Well Service Engines{1250, 1280} Retrofitting for the Dynamic Gas Blending Capability on Certain 3512C Oil Well Service Engines{1250, 1280}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electrical Power Supply - Test
G3500 Engines Temperature Switch
3516B Generator Set Engines with Dynamic Gas Blending Oil Pressure Is Low
C18 Marine Auxiliary and Marine Generator Set Engines Coolant Contains Oil
C280-16 Petroleum Engine Camshaft
C175-16 and C175-20 Generator Set Engines Stub Shaft (Front)
C7.1 Industrial Engine Basic Engine
C7.1 Industrial Engine Glossary of Electronic Control Terms
3606 and 3608 Engines Fuel Injection Lines - Heavy Fuel Oil
3516B Generator Set Engines with Dynamic Gas Blending Oil Filter Differential Pressure Problem
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.