C280-12 and C280–16 Marine Engines Caterpillar


Water Pump - Remove

Usage:

C280-16 A4F

拆卸步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     138-7573     连杆支架     1    


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。


  1. 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。

  1. 断开进水口的接头。 盖上开口。



    图 1g03078276

  1. 拆下四颗螺栓 (1) 。



    图 2g03078338

  1. 将工具 (A) 和适当的起吊设备连接在水泵 (3) 上。 水泵 (3) 的重量约为 68 kg (150 lb)。

  1. 拆下六个螺栓 (2) 。

  1. 拆下水泵 (3) 。

  1. 将 O 形密封圈从水泵和前壳体之间的接头上拆下。 弃置 O 形密封圈。
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.