Auxiliary Water Pump - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7573     | 连杆支架     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 为辅助水泵和前壳体之间的接头安装一个新的 O 形密封圈。 安装前,将薄薄一层甘油涂抹在 O 形密封圈上。
- 将工具 (A) 和适当的起吊设备连接在水泵 (3) 上。 水泵 (3) 的重量约为 68 kg (150 lb)。
- 为水泵和前壳体之间的接头安装一个新的 O 形密封圈。 安装前,将薄薄一层甘油涂抹在 O 形密封圈上。
- 从前壳体上拆卸工具 (B) 。
Show/hide table
图 1 | g03082116 |
- 将辅助水泵 (4) 放到前壳体上,并且滑动辅助水泵 (4) 就位。
- 安装六条螺栓 (3) 。 拧紧螺栓至扭矩值为 60 ± 12 N·m (44 ± 9 lb ft)。 拆下工具 (B) ,然后安装其余的螺栓 (3) 。
- 安装三条螺栓 (2) 和螺栓 (1) 。 拧紧螺栓 (2) 和 (1) 至扭矩为 47 ± 9 N·m (35 ± 7 lb ft)。
Show/hide table
图 2 | g03082360 |
- 连接进水口的接头。
- 向冷却系统加注冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Caterpillar Information System:
2012/06/15 New O-Ring Seals Are Used for the Tube in Certain C175-16 Engine Oil Pressure Regulators {1304}
2012/06/08 A New Valve Cover Is Used on Certain C175 Engines {1107}
C280-12 and C280–16 Marine Engines Auxiliary Water Pump - Remove
2012/11/30 New Engine Software Is Used on Certain C27 and C32 Industrial Engines {1901, 1920}
C280-12 and C280–16 Marine Engines Water Pump - Install
C18 Marine Engine Product Description
C280-12 and C280–16 Marine Engines Water Pump - Remove
Installation of the White Noise Back Up Alarms {7406} Installation of the White Noise Back Up Alarms {7406}
2012/06/08 New Fuel Injectors Are Used on Certain 3500 Engines {1251, 1290}
3516C Generator Set Engines Fuel Injection Pump
3516C Generator Set Engines Fuel Injection Pump
3516C Generator Set Engines Diesel Exhaust Fluid Tank
3500B and 3500C Marine Engines Fuel Injector Mechanism
C7.1 Industrial Engine Coolant (ELC) - Change
3500 Engines Fuel Injector Mechanism
C4.4 Industrial Engine Coolant Extender (ELC) - Add
C7.1 Industrial Engine Coolant Level - Check
C7.1 Industrial Engine Coolant Sample (Level 1) - Obtain
C7.1 Industrial Engine Coolant Sample (Level 2) - Obtain
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Remove
C175-16 Locomotive Engine Fuel Lines - High Pressure Common Rails
2012/07/09 A New Alternator Belt Guard Is Used on Certain 3500 Machine Engines {7150, 7174}
3500C Marine Engines Fuel Injector
3500 Engines Camshaft