Housing (Front)
Show/hide table
Illustration 1 | g02991597 |
Front view of engine |
Show/hide table
Illustration 2 | g02991598 |
Left side view of engine |
Show/hide table
Specification for 248-2609 Front Housing Gp | |||
Item | Qty | Part | Specification Description |
- | - | - | During assembly, the rear face of the housing and the front face of the cylinder block must be free of oil, fuel, water, dirt, assembly compounds, and any other contaminants. |
1 | 1 | 0L-2070 Bolt | Length of 3/8 inch thread bolt is |
2 | 1 | 0T-0055 Bolt | Length of 3/8 inch thread bolt is |
3 | 8 | 5P-4255 Locking Bolt | Use the following procedure in order to tighten the bolts that fasten the plate to the cylinder block:
1. Tighten the locking bolts to 2. Again tighten the locking bolts to |
4 | 10 | 0S-1588 Bolt | Length of 3/8 inch thread bolt is |
5 | 1 | 166-9144 Gasket | After assembly, trim the gasket and flush the gasket with the face of the housing. |
6 | 1 | 155-9524 Integral Seal | Before installation, apply ultra blue Loctite 587 to bottom of the integral seal to block joint. |
- | - | - | Apply ultra blue Loctite 587 in order to fill the space at the connecting joint of the front plate, oil pan gasket, and cylinder block. |
Caterpillar Information System:
3500C Marine Engines Accessory Drive (Lower Left Hand)
3500C Marine Engines Accessory Drive
3500C Marine Engines Accessory Drive (Upper Left Hand)
3500B and 3500C Marine Engines Accessory Drive (Upper Right Hand)
320 GC, 320 and 323 Excavator Machine Systems Specifications Quick Coupler
C4.4 Generator Sets Generator Winding Insulation - Test
2012/05/14 New Software for Certain G3520C Engines Has a Lower BTU Limit {1901, 1920}
C4.4 Marine Generator Set Coolant Level - Check
C4.4 Marine Generator Set Coolant - Change
C4.4 Marine Generator Set Aftercooler Core - Inspect/Clean/Test
C4.4 Marine Generator Set Fluid Recommendations
3512C and 3516C Marine Auxiliary Engines Engine Control Switch - Test
3512C and 3516C Marine Engines Air Lines - Crankcase
3512C and 3516C Marine Engines Auxiliary Drive Pulley
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
3512C and 3516C Marine Engines Auxiliary Drive Pulley
C15 Generator Set Engine Flywheel
2012/04/17 An Improved Front Crankshaft Seal is Used on Certain 3306B Engines {1160, 1161}
C4.4 Marine Generator Set Rotating Rectifier - Inspect/Test
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Transmission Operation
C4.4 Marine Generator Set Space Heater - Test
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201} Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Lifting and Tying Down the Transmission
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Lubricant Viscosities