3500C Marine Engines Caterpillar


Accessory Drive (Lower Left Hand)

Usage:

3516C BS2


Illustration 1g02991562

Table 1
Specification for 380-5016 Accessory Drive Gp 
Item  Qty  Part  Specification Description 
157-2811 Thrust Washer  Thickness is 8.50 ± 0.05 mm (0.335 ± 0.002 inch)
315-2643 Pump Drive Shaft  Diameter is 74.900 ± 0.015 mm (2.9488 ± 0.0006 inch)
7C-3258 Thrust Washer Assembly  Apply blue Loctite 242 to the 7N-2047 Dowel. 
Protrusion of the 7N-2047 Dowel from the surface is 4.5 ± 0.5 mm (0.18 ± 0.02 inch).
Thickness is 7.00 ± 0.15 mm (0.276 ± 0.006 inch).
144-8263 Idler Gear As  Bore of the 140-9597 Bushing after assembly is 90.000 ± 0.010 mm (3.5433 ± 0.0004 inch)
Installation depth for the 140-9597 Bushing is 2.3 ± 0.5 mm (0.09 ± 0.02 inch).
Diameter of the 7E-0273 Idler Gear is 96.000 ± 0.025 mm (3.7795 ± 0.0010 inch).
259-4598 O-Ring Seal  Lubricate the bore lightly with the lubricant that is being sealed. 
7C-3260 Shaft  Diameter is 89.88 ± 0.02 mm (3.539 ± 0.001 inch)
7E-0275 Water Pump Drive Gear  Bore is 74.980 ± 0.025 mm (2.9520 ± 0.0010 inch)

Caterpillar Information System:

3500C Marine Engines Accessory Drive
3500C Marine Engines Accessory Drive (Upper Left Hand)
3500B and 3500C Marine Engines Accessory Drive (Upper Right Hand)
320 GC, 320 and 323 Excavator Machine Systems Specifications Quick Coupler
C4.4 Generator Sets Generator Winding Insulation - Test
2012/05/14 New Software for Certain G3520C Engines Has a Lower BTU Limit {1901, 1920}
C4.4 Marine Generator Set Coolant Level - Check
C4.4 Marine Generator Set Coolant - Change
C4.4 Marine Generator Set Aftercooler Core - Inspect/Clean/Test
C4.4 Marine Generator Set Fluid Recommendations
3512C and 3516C Marine Auxiliary Engines Engine Control Switch - Test
3512C and 3516C Marine Auxiliary Engines Emergency Stop - Test
C15 Generator Set Engine Housing (Front)
3512C and 3516C Marine Engines Air Lines - Crankcase
3512C and 3516C Marine Engines Auxiliary Drive Pulley
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
3512C and 3516C Marine Engines Auxiliary Drive Pulley
C15 Generator Set Engine Flywheel
2012/04/17 An Improved Front Crankshaft Seal is Used on Certain 3306B Engines {1160, 1161}
C4.4 Marine Generator Set Rotating Rectifier - Inspect/Test
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Transmission Operation
C4.4 Marine Generator Set Space Heater - Test
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201} Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Lifting and Tying Down the Transmission
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.