3500C Marine Engines Caterpillar


Accessory Drive

Usage:

3512C 2A2


图 1g02991376

表 1
334-5317 附件驱动总成的技术规格 
项目  数量  零件  技术规格说明 
144-8263 惰齿轮组件  组装后, 140-9597 衬套的孔径为 90.000 ± 0.010 mm (3.5433 ± 0.0004 in)。 
140-9597 衬套的安装长度为 2.3 ± 0.5 mm (0.09 ± 0.02 in)
7E-0273 惰轮直径为 96.000 ± 0.025 mm (3.7795 ± 0.0010 in)
259-4598 O 形密封圈  利用所密封的润滑剂轻轻润滑内孔。 
7C-3260 轴  直径为 89.88 ± 0.02 mm (3.539 ± 0.001 in)。 
7N-5874 辅助驱动轴  直径为 74.900 ± 0.015 mm (2.9488 ± 0.0006 in)。 
7E-0275 水泵驱动齿轮  孔径为 74.980 ± 0.025 mm (2.9520 ± 0.0010 in)。 
7C-3258 止推垫圈组件  将蓝色 Loctite 242 涂覆到 7N-2047 定位销上。 
7N-2047 定位销突出表面的部分为 4.5 ± 0.5 mm (0.18 ± 0.02 in)
厚度为 7.00 ± 0.15 mm (0.276 ± 0.006 in)
7N-7539 止推垫圈  厚度为 8.50 ± 0.05 mm (0.335 ± 0.002 in)。 

Caterpillar Information System:

3500C Marine Engines Accessory Drive (Upper Left Hand)
3500B and 3500C Marine Engines Accessory Drive (Upper Right Hand)
320 GC, 320 and 323 Excavator Machine Systems Specifications Quick Coupler
C4.4 Generator Sets Generator Winding Insulation - Test
2012/05/14 New Software for Certain G3520C Engines Has a Lower BTU Limit {1901, 1920}
C4.4 Marine Generator Set Coolant Level - Check
C4.4 Marine Generator Set Coolant - Change
C4.4 Marine Generator Set Aftercooler Core - Inspect/Clean/Test
C4.4 Marine Generator Set Fluid Recommendations
3512C and 3516C Marine Auxiliary Engines Engine Control Switch - Test
3512C and 3516C Marine Auxiliary Engines Emergency Stop - Test
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
3500C Marine Engines Accessory Drive (Lower Left Hand)
C15 Generator Set Engine Housing (Front)
3512C and 3516C Marine Engines Air Lines - Crankcase
3512C and 3516C Marine Engines Auxiliary Drive Pulley
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
3512C and 3516C Marine Engines Auxiliary Drive Pulley
C15 Generator Set Engine Flywheel
2012/04/17 An Improved Front Crankshaft Seal is Used on Certain 3306B Engines {1160, 1161}
C4.4 Marine Generator Set Rotating Rectifier - Inspect/Test
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Transmission Operation
C4.4 Marine Generator Set Space Heater - Test
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201} Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.