Refill Capacities
Prostornina sistema mazanja motorja vključuje prostornino oljnih filtrov, ki so nameščeni v tovarni. Dodatni sistemi za filtriranje olja (če so vgrajeni) zahtevajo več olja. Glejte tehnične podatke proizvajalca dodatnega sistema za filtriranje olja. Če želite več informacij o polnilnih količinah sistema mazanja motorja, se obrnite na zastopnika podjetja Cat.
Show/hide table
| Približne polnilne količine za sisteme mazanja motorja serije C280 | ||||
| Prostor ali sistem | Motorji C280-06 | Motorji C280-08 | Motorji C280-12 | Motorji C280-16 |
| Industrijski motorji in motorji sklopov generatorjev | ||||
| Standardno oljno korito | |
|
Ni na voljo | |
| Globoko oljno korito | |
Ni na voljo | |
Ni na voljo |
| Ladijski motorji | ||||
| Standardno oljno korito(1) | |
|
|
|
| Globoko oljno korito(2) | |
Ni na voljo | Ni na voljo | Ni na voljo |
Show/hide table
| (1) | Ničstopinjska namestitev |
| (2) | Ničstopinjska namestitev |
Prostornine hladilnih sistemov
Za ustrezno vzdrževanje hladilnega sistema morate poznati skupno prostornino hladilnega sistema. Skupna prostornina hladilnega sistema se bo med posameznimi stroji razlikovala. Skupna prostornina hladilnega sistema lahko vključuje naslednje sestavne dele: motor, izenačevalno posodo, toplotni izmenjevalnik, hladilnik, hladilnik na kobilici in cevi.
Glejte specifikacije družbe Caterpillar ali navodila stroja (OEM). Zabeležite skupno prostornino hladilnega sistema v ustrezni tabeli.
Show/hide table
| Približne polnilne količine za hladilne sisteme motorja serije C280 | ||||
| Prostor ali sistem | Motor C280-06 | Motor C280-08 | Motor C280-12 | Motor C280-16 |
| Motor | |
|
|
|
| Standardna izenačevalna posoda | |
|
|
|
| Izbirna izenačevalna posoda | |
|
|
|
| Cevi (izenačevalna posoda) (1) | |
|
|
|
| Toplotni izmenjevalnik | |
|
|
|
| Prostornina hladilnega sistema | ||||
Show/hide table
| (1) | Prostornina cevi je tipična za izvedbe sklopa generatorja. |
Caterpillar Information System:
C175-16 Marine Propulsion Engines Engine Harness
3500E Marine Engines Emergency Stopping
C175-16 Engines for Off-Highway Truck/Tractors Coolant Temperature Is Low
Piston Pin Retainers May Be Incorrectly Installed in Certain Remanufactured Cylinder Packs{1225, 1239} Piston Pin Retainers May Be Incorrectly Installed in Certain Remanufactured Cylinder Packs{1225, 1239}
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine Systems Final Drive
3512B and 3512C Petroleum Generator Set Engines Timing - Calibrate
C175-16 Marine Propulsion Engines Crankcase Pressure Is High
2012/03/13 Telehandler Transmission Shifting is Improved with Minor Dimensional Change {3030}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending High Altitude Derate Occurrence
C175-16 Marine Propulsion Engines Engine Does Not Crank
826K Landfill Compactor Diesel Particulate Filter Regeneration
C175-16 Engines for Off-Highway Truck/Tractors Engine Cranks but Does Not Start
C280 Marine, Marine Auxiliary, and Petroleum Engines Coolant (DEAC) - Change
C280 Marine, Marine Auxiliary, and Petroleum Engines Coolant (ELC) - Change
3516B Generator Set Engines with Dynamic Gas Blending ECM - Replace
C280 Marine, Marine Auxiliary, and Petroleum Engines Coolant Level - Check
C280 Marine, Marine Auxiliary, and Petroleum Engines Coolant Sample (Level 1) - Obtain
C15 Petroleum Generator Set Engines Engine Valve Lash - Inspect/Adjust
C280 Marine, Marine Auxiliary, and Petroleum Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
C280 Marine, Marine Auxiliary, and Petroleum Engines Engine Air Precleaner - Check/Clean
C280 Marine, Marine Auxiliary, and Petroleum Engines Engine Valve Lash and Bridge - Check
C280 Marine, Marine Auxiliary, and Petroleum Engines Exhaust Piping - Check
C280 Marine, Marine Auxiliary, and Petroleum Engines Metal Particle Detector - Inspect/Clean
C280 Marine, Marine Auxiliary, and Petroleum Engines Engine Speed Control