Turbocharger Oil Lines
Show/hide table
| |
| Illustration 1 | g02829416 |
Show/hide table
| Specification for 326-2875 Turbocharger Oil Lines Gp | |||
| Item | Qty | Part | Specification description |
| 1 | 4 | 1A-5964 Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the bearing surfaces. |
| 2 | 2 | 8L-2786 O-Ring Seal | Lubricate the bore lightly with clean engine oil or with an approved equivalent lubricant. |
| 3 | 4 | 0T-0573 Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the bearing surfaces. |
| 4 | 1 | 250-1498 Elbow As | Lubricate the bore lightly with clean engine oil or with an approved equivalent lubricant. |
| 5 | 1 | 6V-4589 O-Ring Seal | Lubricate the bore lightly with clean engine oil or with an approved equivalent lubricant. |
| 6 | 4 | 5P-9890 O-Ring Seal | Lubricate the bore lightly with clean engine oil or with an approved equivalent lubricant. |
Caterpillar Information System:
3512C and 3516C Marine Engines Crankshaft
3500B and 3500C Marine Engines Cylinder Head Valves
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Cylinder Head Valves
3512C and 3516C Industrial Engines Air Lines
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Site Preparation
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Receiving and Handling
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395} Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
349F and 352F Excavators Radio - If Equipped
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Symbols
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Acronyms
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Serial Number Plate
3516B Generator Set Engines with Dynamic Gas Blending General Information
2012/01/19 Sealing of the Ignition Harness on Certain G3300 and G3400 Engines {1408, 7555}
Product Identification Numbers (PIN) Location Guide Material Handler (Track)
C13 Engine for Combat and Tactical Vehicles Electronic Control Wiring Group
Product Identification Numbers (PIN) Location Guide Material Handler (Wheel)
C13 Engine for Combat and Tactical Vehicles Compression Brake
3516C Locomotive Engines Selective Catalytic Reduction Dosing Lines Blockage - Test
2012/01/16 A New Piston and Rod Group with a One-Piece Piston Is Used in Certain 3512B and 3516B High-Displacement Locomotive Engines {1225}
C15 and C18 Engines for Caterpillar Built Machines Fumes Disposal Filter - Remove and Install
Product Identification Numbers (PIN) Location Guide Backhoe Loader
C15 and C18 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C7.1 Marine Propulsion Engine Overhaul (Major)
3516C Locomotive Engines Selective Catalytic Reduction Aftertreatment SCR System Verification Test