|
Grounding conductor for field wiring
|
|
Bonding point for internal bonding of equipment parts to ground
|
|
Caution. Refer to manual for more information.
|
|
Caution - See service manual
|
|
Telecommunication connection
|
|
Not a connection - Not a connection for a telecommunication network.
|
|
High leakage current - Earth connection essential before connecting the supply.
|
|
Lithium battery - Danger of explosion if the battery is incorrectly replaced. Replace the battery with the same type of battery or replace the battery with an equivalent battery. Dispose of the batteries according to the manufactures instructions.
|
|
The heat sink or the bracket is not grounded. - Test before touching.
|
|
Safety extra low voltage connections only.
|
|
Wait for 5 minutes before disconnecting all power sources before removing any covers or panels.
|
|
|
|
Illustration 2 | g00785185 |
The system is designed for services that have a three wire grounded wire configuration.
|
|
|
|
Illustration 3 | g00785207 |
The system is designed for services that have a delta configuration.
|
|
|
|
Illustration 4 | g00785208 |
The system is designed for services that are impedance grounded.
|
|
|
|
Illustration 5 | g00785210 |
The system is designed for with services that have a 4-wire grounded wire configuration.
|
|
|
|
Illustration 6 | g00785212 |
The UPS receives power from multiple sources.
|
|
|
|
Illustration 7 | g00785215 |
Maintenance bypass switch
|
|
|
|
Illustration 8 | g02442538 |
Warning bypass switch shut off
|
|
|
|
Illustration 11 | g02442139 |
MMU modules are connected in parallel. Voltage may be present at the output of this module when the input power has been removed.
|
|
|
|
Illustration 13 | g02442560 |
MMU modules are connected in parallel. Deenergize input and output switches prior to servicing.
|