Flywheel Housing
Show/hide table
| |
| 图 1 | g02648616 |
Show/hide table
| 技术规格，适用于 160-2612 飞轮壳体总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 组装期间，飞轮壳体前端面和缸体后端面必须没有机油、燃油、水和组装用复合剂。 | |||
| 涂覆超蓝 Loctite 587 以便填充缸体、飞轮壳体和油底壳之间的空隙。 涂抹密封剂 10 分钟内必须组装好部件。 | |||
| 按照下列步骤拧紧飞轮壳体的螺栓： | |||
| 1 | 9 | 7K-6058 螺栓 | 1. 按照图示的数字顺序将螺栓 1 至 9 拧紧至扭矩为 2. 按照图示的数字顺序将螺栓 10 至 24 拧紧至扭矩为 3. 再次按照图示的数字顺序将螺栓 1 至 9 拧紧至扭矩为 4. 再次按照图示的数字顺序将螺栓 10 至 24 拧紧至扭矩为 |
| 2 | 10 | 165-3929 螺栓 | |
| 3 | 5 | 165-3933 螺栓 | |
| 4 | 3 | 0S-1566 螺栓 | 拧紧至扭矩为 |
Caterpillar Information System:
C175-16 Locomotive Engine Crankcase Pressure Sensor
G3516H and G3520H Generator Set Engines Atmospheric Pressure Sensor
G3600 A4 Engines Engine Speed Sensor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
3516C Generator Set Engines Engine Speed/Timing Sensor
349F and 352F Excavators Machine System Specifications Solenoid Valve (System 16, 1-Way, 2-Pump)
CX28 On-Highway Transmission Transfer Gear Oil Level - Check
CG137-08 and CG137-12 Engines Exhaust Manifold - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
CG137-08 and CG137-12 Industrial Engines Lubrication System
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C175-16 Locomotive Engine Fuel Pressure Sensor
3512C and 3516C Marine Engines Air Starting Motor
CX28 On-Highway Transmission Transfer Gear Oil - Change
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
2011/08/26 A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3500 Engines {1261, 7554}
XQ125 Generator Set Electrical System
C27 Generator Set Product Storage
CX28 Military On-Highway Transmission Transfer Gear and Case - Check (Before Installation)
XQ125 Generator Set Product Installation
2011/07/18 New Software Is Used for C175-16 Generator Set Engines {1920}
XQ60 Rental Generator Set After Starting Engine
C27 Generator Set Generator Operation