Exhaust Manifold - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 207-1600 (1)     | 橡胶润滑剂     | 1     |
207-1601 | 橡胶润滑剂     | 1     | |
B     | -     | LOCTITE C5-A 铜防粘结剂     | -     |
C     | 1U-6396     | O 形圈组装固定胶     | 1     |
D     | -     | LOCTITE 771     | -     |
Show/hide table
( 1 ) | 用于 EAME |
开始:
- 拆下机油滤清器。
- 拆下涡轮增压器。
- 拆下传感器 (1) ,然后拆下管组件 (2) 。
Show/hide table
图 1 | g02649150 |
- 拆下螺栓 (7) 。 拆下弯管和管道 (6) 。
Show/hide table
图 2 | g02649198 |
- 拆下螺栓 (3 ) 。 连同垫圈、隔套和螺柱拆下锁紧螺母 (4) 。
- 拆下歧管 (5) 。 安装时,废弃密封垫并更换。
- 对另一侧重复步骤 1 至步骤 4。
- 拆下螺栓 (8) 。 拆下螺母 (10) 和螺柱。
Show/hide table
图 3 | g02649284 |
- 拆下歧管 (9) 。 安装时,废弃密封垫并更换。
- 拆下支架 (13) 。
Show/hide table
图 4 | g02649319 |
- 拆下管道 (12) 和 O 形密封圈。
- 拆下螺栓 (15) 和三条螺栓 (16) 。 卸下支架 (14) 。
安装步骤
- 按与拆卸相反的顺序安装歧管 (5) 和 (9) 。
- 拧紧螺栓 (15) 至扭矩为 54 ± 7 N·m (40 ± 5 lb ft)。
- 用工具 (A) 润滑管道 (12) 的 O 形密封圈。 安装前,确保已拆下杯塞。
- 将工具 (B) 涂覆到螺母 (10) 的螺纹上。 拧紧螺柱至扭矩为 35 ± 5 N·m (26 ± 4 lb ft)。
- 用工具 (A) 润滑管道 (6) 的 O 形密封圈。
- 将工具 (B) 涂覆到锁紧螺母 (4) 的螺纹上。 拧紧至扭矩为 38 ± 5 N·m (28 ± 4 lb ft)。
Show/hide table图 5 g00793378
锁紧螺母 (4) 的拧紧顺序。
- 将工具 (C) 涂覆到管组件 (2) 的孔和 O 形密封圈上。
- 将工具 (D) 涂覆到传感器 (1) 上。
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
CG137-08 and CG137-12 Industrial Engines Lubrication System
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C3.4B Engines for Caterpillar Built Machines Compression - Test
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
C13, C15, and C18 Tier 4 Final Engines Flywheel
C15 and C18 Engines for Caterpillar Built Machines Engine Trunnion
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}
2011/07/22 Proper Installation of Exhaust Bellows for C175-16 Generator Set Engines {1059}
CG137-08 and CG137-12 Engines Exhaust Bypass - Remove and Install
CX28 On-Highway Transmission Transfer Gear Oil Level - Check
349F and 352F Excavators Machine System Specifications Solenoid Valve (System 16, 1-Way, 2-Pump)
3516C Generator Set Engines Engine Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
G3600 A4 Engines Engine Speed Sensor
G3516H and G3520H Generator Set Engines Atmospheric Pressure Sensor
C175-16 Locomotive Engine Crankcase Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C175-16 Locomotive Engine Fuel Pressure Sensor
3512C and 3516C Marine Engines Air Starting Motor
CX28 On-Highway Transmission Transfer Gear Oil - Change
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}