Product Installation
Perform the following procedure after the power module has been delivered.
- Inspect the power module for any internal damage or external damage that may have occurred during shipping.
- Open the generator controls compartment. Inspect the bus bar connections at the generator circuit breaker. Ensure that all electrical connections are properly tightened. If necessary, torque the connections.
- Ensure that all of the control relays are seated in the relay base. If a relay is not seated correctly, then carefully push the relay onto the base. Ensure that the clip that secures the relay is installed.
- Turn on the DC power. Ensure that all electronic devices are operating properly.
- Ensure that all operator interface devices work properly. Operator interface devices include switches, lights, and circuit breakers
- Verify that no shutdowns are active.
- Check the batteries for proper voltage level.
- Turn off the DC power.
Caterpillar Information System:
CX28 Military On-Highway Transmission Transfer Gear and Case - Check (Before Installation)
C27 Generator Set Product Storage
XQ125 Generator Set Electrical System
2011/08/26 A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3500 Engines {1261, 7554}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
CX28 On-Highway Transmission Transfer Gear Oil - Change
3512C and 3516C Marine Engines Air Starting Motor
C175-16 Locomotive Engine Fuel Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C175-16 Locomotive Engine Crankcase Pressure Sensor
G3516H and G3520H Generator Set Engines Atmospheric Pressure Sensor
G3600 A4 Engines Engine Speed Sensor
2011/07/18 New Software Is Used for C175-16 Generator Set Engines {1920}
XQ60 Rental Generator Set After Starting Engine
C27 Generator Set Generator Operation
C175-16 Locomotive Engine Engine Oil Pressure Sensor
3500B and 3500C Marine Engines Engine Air Cleaner Service Indicator
3500B Engines for Caterpillar Built Power Modules Crankcase Breather
3516C Generator Set Engines Turbocharger
CG137-08 and CG137-12 Engines Aftercooler - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Air Cleaner Housing - Remove and Install
CG137-08 and CG137-12 Engines Turbocharger - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Water Temperature Regulator - Remove and Install
XQ125 Generator Set Generator Start-up Checklist