3516C Generator Set Engines Caterpillar


Turbocharger

Usage:

3516C LY6


Illustration 1g02652196
Front view

Table 1
Specification for 355-9331 Turbocharger Gp 
Item  Qty  Part  Specification Description 
16  2N-2765 High Temperature Bolt  Before assembly, lubricate the threads and bearing surfaces with Loctite C5A Copper Anti-Seize. 
Torque to 54 ± 5 N·m (40 ± 4 lb ft).


Illustration 2g02652794
Right side view

Table 2
Specification for 355-9331 Turbocharger Gp 
Item  Qty  Part  Specification Description 
9N-2038 Turbine Clamp As  Use the following procedure to tighten the turbine clamp assembly:
1. Tighten the clamp to 12.4 to 14.7 N·m (109.7 to 130.1 lb in).
2. Lightly tap the clamp all around.
3. Again, tighten the clamp to 12.4 to 14.7 N·m (109.7 to 130.1 lb in)
6L-3005 Band Clamp  Use the following procedure to tighten the turbine clamp assembly:
1. Tighten the clamp to 9.5 ± 1.0 N·m (84.1 ± 8.9 lb in).
2. Lightly tap the clamp all around.
3. Again, tighten the clamp to 9.5 ± 1.0 N·m (84.1 ± 8.9 lb in)
239-5858 Compressor Clamp Assembly  Use the following procedure to tighten the compressor clamp assembly:
1. Tighten the clamp to 12.4 to 14.7 N·m (109.7 to 130.1 lb in).
2. Lightly tap the clamp all around.
3. Again, tighten the clamp to 12.4 to 14.7 N·m (109.7 to 130.1 lb in)

Caterpillar Information System:

3500B Engines for Caterpillar Built Power Modules Crankcase Breather
3500B and 3500C Marine Engines Engine Air Cleaner Service Indicator
C175-16 Locomotive Engine Engine Oil Pressure Sensor
C27 Generator Set Generator Operation
XQ60 Rental Generator Set After Starting Engine
2011/07/18 New Software Is Used for C175-16 Generator Set Engines {1920}
XQ125 Generator Set Product Installation
CX28 Military On-Highway Transmission Transfer Gear and Case - Check (Before Installation)
C27 Generator Set Product Storage
XQ125 Generator Set Electrical System
2011/08/26 A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3500 Engines {1261, 7554}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
CG137-08 and CG137-12 Engines Aftercooler - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Air Cleaner Housing - Remove and Install
CG137-08 and CG137-12 Engines Turbocharger - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Water Temperature Regulator - Remove and Install
XQ125 Generator Set Generator Start-up Checklist
2013/05/14 Table for Monitoring System of the Operations and Maintenance Manual for the Cat® Water Delivery System {7490}
TA19 M4WD Agricultural Transmission Relief Valve (Charge Pressure)
CG137-08 and CG137-12 Engines Water Pump - Remove and Install
CG137-08 and CG137-12 Engines Auxiliary Water Pump - Remove and Install
CG137-08 and CG137-12 Industrial Engines Electrical Power Supply - Test
2011/08/12 New Water Pump Groups Are Used on Certain Commercial Engines {1361}
2011/08/18 New Water Pump Groups Are Used on Certain On-Highway Truck Engines {1361}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.