Alternator
Show/hide table
| |
| Illustration 1 | g03357091 |
|
Typical example (1) Terminal "D+" (3) Terminal "W" | |
(2) Terminal "B+"
- Tighten the nut on the terminal to the following torque. ...
11 N·m (97 lb in)
Tighten the nut for the alternator pulley to the following torque. ...
Output
- The output of the alternator ... 65 Amp
Show/hide table
| |
| Illustration 2 | g03357125 |
|
Typical example (3) Terminal "W" | |
(1) Terminal "D+"
- Tighten the nut on the terminal to the following torque. ...
3.25 N·m (28.76 lb in)
(2) Terminal "B+"
- Tighten the nut on the terminal to the following torque. ...
11 N·m (97 lb in)
Tighten the nut for the alternator pulley to the following torque. ...
Output
- The output of the alternator ... 80 Amp
Show/hide table
| |
| Illustration 3 | g03357160 |
|
Typical example (1) Terminal "W" (2) Terminal "D+" | |
(3) Terminal "B+"
- Tighten the nut on the terminal to the following torque. ...
7.75 N·m (68.60 lb in)
Tighten the nut for the alternator pulley to the following torque. ...
Output
- The outputs of the alternators ... 100 Amp, and 120 Amp
Show/hide table
| |
| Illustration 4 | g02620019 |
|
Typical example (3) Terminal "W" | |
(1) Terminal "B+"
- Tighten the nut on the terminal to the following. ...
7.75 N·m (68.60 lb in)
(2) Terminal "D+"
- Tighten the nut on the terminal to the following. ...
3.25 N·m (28.76 lb in)
Tighten the nut for the alternator pulley to the following torque. ...
Output
- The outputs of the alternators ... 65 Amp
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Cylinder Head Valves
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Boost Pressure Sensor
349F and 352F Excavators Machine System Specifications Control Valve (Boom Lowering)
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Fuel Transfer Pump
C15 and C18 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor
Converting the 165-1594 Harness to the 3E-0020 Converter Control Gp {1408, 1926} Converting the 165-1594 Harness to the 3E-0020 Converter Control Gp {1408, 1926}
C15 Generator Sets Engine Crankcase Breather - Clean
C4.4 Generator Sets Electrical System
C15 Generator Sets Fire Prevention and Explosion Prevention
C4.4 Generator Sets Burn Prevention
Retrofitting for Ultra Lean Burn (ULB) on a G3508 Engine{1000, 775E} Retrofitting for Ultra Lean Burn (ULB) on a G3508 Engine{1000, 775E}
C18 Generator Set Alarms and Shutoffs
3516C Generator Sets Engine Oil and Filter - Change
C18 Generator Set Refill Capacities
C18 Generator Set Coolant Extender (ELC) - Add
C13 Industrial Engine Refill Capacities
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Auxiliary Water Pump
C3.4B Engines For Caterpillar Built Machines Fuel Manifold (Rail)
C3.4B Engines For Caterpillar Built Machines Fuel Filter Base - Secondary Fuel Filter Base
C3.4B Engines For Caterpillar Built Machines Front Housing and Covers
C3.4B Engines For Caterpillar Built Machines Fuel Injection Pump
C3.4B Engines For Caterpillar Built Machines Glow Plugs