Fuel Transfer Pump
Show/hide table
Illustration 1 | g02619478 |
Show/hide table
Specification for 282-8409 Fuel Transfer Pump Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 7C-2870 Terminal Bushing | Before installation, inside diameter of the terminal bushing for gear shaft is Installation depth of terminal bushing is |
2 | 1 | 268-1903 Drive Shaft As | Diameter of the gear is Length of the gear is |
3 | 1 | 1W-4003 Idler Gear As | Diameter of the idler gear assembly is Length of the gear is |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor
Converting the 165-1594 Harness to the 3E-0020 Converter Control Gp {1408, 1926} Converting the 165-1594 Harness to the 3E-0020 Converter Control Gp {1408, 1926}
C15 Generator Sets Engine Crankcase Breather - Clean
C4.4 Generator Sets Electrical System
C15 Generator Sets Fire Prevention and Explosion Prevention
C4.4 Generator Sets Burn Prevention
C15 Generator Sets General Hazard Information
G3304B and G3306B Engines Fan Drive
3406C Industrial Engine Belts - Inspect/Adjust/Replace
C4.4 Generator Sets Battery Information
3516C Generator Sets Product Description
3516C Generator Sets Fluid Recommendations
349F and 352F Excavators Machine System Specifications Control Valve (Boom Lowering)
C13, C15, and C18 Tier 4 Final Engines Boost Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Cylinder Head Valves
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor
C3.4B Engines For Caterpillar Built Machines Alternator
Retrofitting for Ultra Lean Burn (ULB) on a G3508 Engine{1000, 775E} Retrofitting for Ultra Lean Burn (ULB) on a G3508 Engine{1000, 775E}
C18 Generator Set Alarms and Shutoffs
3516C Generator Sets Engine Oil and Filter - Change
C18 Generator Set Refill Capacities
C18 Generator Set Coolant Extender (ELC) - Add
C13 Industrial Engine Refill Capacities