NOTICE |
---|
Refer to Systems Operation, Testing, and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. |
If necessary, install a new fuel filter element to canister (6). Refer to Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace" for the correct procedure.
Illustration 1 | g02621258 |
Typical example |
(1) Tighten the connections to the following torque. ...
(2) Tighten the screw to the following torque. ...
(3) Tighten the screw to the following torque. ...
(4) Tighten the setscrews to the following torque. ...
(5) Tighten the fuel temperature sensor to the following torque. ...