Cylinder Head Valves
Show/hide table
Illustration 1 | g01335203 |
Typical example |
When the valve springs (1) are replaced the valve springs must be replaced in pairs.
The free length for the valve spring ...
Show/hide table
The load for the valve spring | The length of the valve spring |
|
|
|
|
Show/hide table
Illustration 2 | g01335204 |
(2) Valve face angle
- Inlet ... 30 degrees
- Exhaust ... 30 degrees
(3) Valve stem diameter
- Inlet ...
7.985 to 8.000 mm (0.31437 to 0.31496 inch) - Exhaust ...
7.985 to 8.000 mm (0.31437 to 0.31496 inch) - Exhaust ...
Clearance
- Clearance of the inlet valve stem ...
0.040 to 0.053 mm (0.00157 to 0.00209 inch)
Clearance
- Clearance of the exhaust valve stem ...
0.040 to 0.053 mm (0.00157 to 0.00209 inch)
(4) Length of valve
- Inlet valve and exhaust valve ...
132.75 to 133.15 mm (5.22637 to 5.24212 inch)
(5) Valve head
- Diameter of inlet valve head ...
41.43 to 41.69 mm (1.63110 to 1.64134 inch) - Diameter of exhaust valve head ...
37.27 to 37.53 mm (1.46732 to 1.47756 inch) - Diameter of exhaust valve head ...
Caterpillar Information System:
C175-16 Locomotive Engine Engine Oil Pump
G3500 A3 Engines Actuator Linkage - Air/Fuel Ratio Control
3500 Generator Sets Coolant Sample (Level 1) - Obtain
UPSB505 Uninterruptible Power Supply Display
UPSB505 Uninterruptible Power Supply Inverter Shutdown
G3500 A3 Engines Throttle Control Linkage
C3.4B Engines For Caterpillar Built Machines Engine Oil Pressure
UPSB505 Uninterruptible Power Supply Temperature Monitor Installation
C3.4B Engines For Caterpillar Built Machines Engine Lifting Bracket
C3.4B Engines For Caterpillar Built Machines Camshaft
C3.4B Engines For Caterpillar Built Machines Cylinder Head
C3.4B Engines For Caterpillar Built Machines Exhaust Manifold
C3.4B Engines For Caterpillar Built Machines Piston Cooling Jet
C3.4B Engines For Caterpillar Built Machines Water Pump
C3.4B Engines For Caterpillar Built Machines Water Temperature Regulator and Housing
C3.4B Engines For Caterpillar Built Machines Valve Mechanism Cover
C175-16 Engine for 795F Series AC Off-Highway Trucks Fuel Priming Pump - Electric
C15 Petroleum Engines Speed/Timing - Test
C15 Petroleum Engines Power Take-Off - Test
C15 and C18 Industrial Engines General Information
2011/04/29 New Software With Increased Fuel System Pressure Parameters Is Available for Certain C32 Marine Engines {1901, 1920}
3500 Generator Sets Fluid Recommendations
C9 Industrial Engines Grounding Stud - Inspect/Clean/Tighten
C3.4B Engines for Caterpillar Built Machines Crankshaft Pulley - Check