C3.4B Engines For Caterpillar Built Machines Caterpillar


Camshaft

Usage:

CD-44B 398


Illustration 1g02844377
Typical example

(1) Bolts

Torque for the bolts ... 25 N·m (18 lb ft)

(2) End play of a camshaft ... 0.1 to 0.3 mm (0.00394 to 0.01181 inch)

Maximum permissible end play of a worn camshaft ... 0.3 mm (0.01181 inch)

(3) The diameters of the camshaft journals are given in the following tables.

Table 1
Camshaft Journals from the Front End of the Engine  Standard Diameter 
1
Front 
53.995 to 54.045 mm (2.12578 to 2.12775 inch) 
2, 3 and 4  49.975 to 50.025 mm (1.96752 to 1.96948 inch) 
5
Rear 
39.975 to 40.025 mm (1.57382 to 1.57578 inch) 

Check the camshaft lobes for visible damage. If a new camshaft is installed, you must install new lifters.

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.