Torque Converter
Show/hide table
Illustration 1 | g03377168 |
Typical example Front view |
Show/hide table
Specification for 288-2663 Torque Converter Gp, 366-9006 Torque Converter Gp, 376-7525 Torque Converter Gp, and 419-0952 Torque Converter Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 8     | 095-0670 Bolt     | Torque to 105 ± 14 N·m (77 ± 10 lb ft).     |
2     | 2     | 7B-0472 Dowel     | Assemble the dowels to the torque converter impeller (3) at height (C) of 37.0 ± 0.5 mm (1.46 ± 0.02 inch).     |
Show/hide table
Illustration 2 | g03377169 |
Typical example Section A-A |
Show/hide table
Item     | Qty     | Part     | Specification Description     |
4     | -     | 275-5308 Friction Disc 260-9557 Plate     |
Thickness of a new friction disc and a new plate is 6.12 ± 0.15 mm (0.241 ± 0.006 inch). (1)     |
5     | 24     | 6V-7981 Bolt     | Torque to 60 ± 7 N·m (44 ± 5 lb ft).     |
6     | 20     | 6V-4249 Bolt     | Torque to 60 ± 7 N·m (44 ± 5 lb ft).     |
7     | 1     | 260-3738 Bolt     | Torque to 285 ± 15 N·m (210 ± 11 lb ft).     |
8     | 1     | 9S-8010 Plug     | Torque to 285 ± 15 N·m (210 ± 11 lb ft).     |
9     | 11     | 1T-0680 Freewheel Spring     | Assemble the freewheel springs with the maximum number of loops to the outside. Length under test force is 5.6 mm (0.22 inch). Test force is 6.7 to 11.1 N (1.5 to 2.5 lb). Free length after test is 9.1 mm (0.36 inch).     |
11     | -     | -     | After installing the O-ring seal (11) in the groove of pilot, lubricate the seal with clean transmission oil before assemble into the clutch housing assembly (10).     |
12     | -     | -     | After installing the O-ring seal (12) in the groove of piston, lubricate the seal with clean transmission oil before assemble into the clutch housing assembly (10).     |
Show/hide table
( 1 ) | Thickness of a new 275-5308 Friction Disc is 3.81 ± 0.10 mm (0.150 ± 0.004 inch).Thickness of a new 260-9557 Plate is 2.31 ± 0.05 mm (0.091 ± 0.002 inch). |
Show/hide table
Illustration 3 | g03377173 |
Torsional coupling group |
Show/hide table
Item     | Qty     | Part     | Specification Description     |
13     | 12     | 1A-2029 Bolt     | Torque to 50 ± 10 N·m (37 ± 7 lb ft).     |
Caterpillar Information System:
C15 Petroleum Generator Set Model View Illustrations
2011/08/18 A New Hose Clamp Is Now used on Certain Truck Engines {1355, 1380, 1393}
3516B HD Generator Set Maintenance Interval Schedule
3516B HD Generator Set Safety Messages - Type 1
G3304B and G3306B Engines Model View Illustrations
C15 Petroleum Generator Set Plate Locations and Film Locations
C15 Petroleum Generator Set Refill Capacities
G3304B and G3306B Engines Product Description
UPSB505 Uninterruptible Power Supply Cable Routing
UPSB130 Uninterruptible Power Supply Fire Prevention and Explosion Prevention
3516C Generator Sets Exhaust Outlet Nitrogen Oxide Sensor - Replace
3516C Generator Sets Exhaust Inlet Nitrogen Oxide Sensor - Replace
Risk of High-Pressure Water Entering The Service Tool Connector on 3500B Locomotive Engines{0785, 1408} Risk of High-Pressure Water Entering The Service Tool Connector on 3500B Locomotive Engines{0785, 1408}
2011/03/21 Engine Air Cleaner Service Indicator on Certain C4.4 Generator Sets {1051, 1054, 7452}
C15 Petroleum Engines Event Codes
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Error Log - Access
PM3516 Power Modules Specifications
UPSB130 Uninterruptible Power Supply Safety Signs and Labels
UPSB505 Uninterruptible Power Supply UPS Isolation
C15 Petroleum Generator Set Safety Messages
Do Not Use Loctite Moly Paste 51049 on Critical Fasteners{0645} Do Not Use Loctite Moly Paste 51049 on Critical Fasteners{0645}
CX31 On-Highway Transmission Oil Filter (Transmission)
C15 Petroleum Engines Control Panel
C15 Petroleum Engines Atmospheric Pressure Sensor - Remove and Install