Torque Converter Housing - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1U-9200 | Lever Puller Hoist Gp | 1 |
B | 138-7575 | Link Bracket | 3 |
Start By:
- Remove the gear pump. Refer to Disassembly and Assembly , "Gear Pump (Torque Converter and Transmission) - Remove".
- Remove the torque converter. Refer to Disassembly and Assembly , "Torque Converter - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove lip seal (1).
Show/hide table
Illustration 2 g02395876 - Disconnect harness assembly (2).
Show/hide table
Illustration 3 g02395878 - Disconnect harness assembly (3) and remove the connecting hardware.
Show/hide table
Illustration 4 g02395880 Show/hide tableIllustration 5 g02395917 - Attach Tooling (A), Tooling (B), and a suitable lifting device onto torque converter housing (4). The weight of torque converter housing (4) is approximately
79 kg (175 lb) . - Remove bolts (5) and bolt (6).
- Remove torque converter housing (4).
Show/hide table
Illustration 6 g02395936 - Remove seal (7).
Show/hide table
Illustration 1 | g02395857 |
Caterpillar Information System:
3600 Distillate Fuel Engines Engine Valve Lash - Check
3600 Distillate Fuel Engines Engine Speed/Timing Sensor - Clean/Inspect
3600 Distillate Fuel Engines Engine Air Precleaner - Check/Clean
3600 Distillate Fuel Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
3600 Distillate Fuel Engines Coolant Temperature Regulator - Replace
3600 Distillate Fuel Engines Coolant Sample (Level 2) - Obtain
3600 Distillate Fuel Engines Coolant Sample (Level 1) - Obtain
3600 Distillate Fuel Engines Coolant Level - Check
3600 Distillate Fuel Engines Coolant Extender (ELC) - Add
3600 Distillate Fuel Engines Coolant (ELC) - Change
3600 Distillate Fuel Engines Coolant (DEAC) - Change
CX31 On-Highway Transmission Gear Pump (Torque Converter and Transmission) - Install - Retarder
CX31 On-Highway Transmission Torque Converter Housing - Install
3600 Distillate Fuel Engines Exhaust Piping - Check
3600 Distillate Fuel Engines Metal Particle Detector - Inspect/Clean
Reconditioning Dimensions for Carrier Rollers {4154, 4180} Reconditioning Dimensions for Carrier Rollers {4154, 4180}
2011/02/02 New Software is Now Used on Current Production C9, C11, C13, C15, C18, and Certain C27 Industrial Engines {1901, 1920}
C6.6 Industrial Engine Maintenance Interval Schedule
826K Landfill Compactor Diesel Particulate Filter - Clean - Emission Related Component
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Diesel Particulate Filter - Clean/Replace
3516C Locomotive Engines Aftercooler - Remove and Install
CG137-08 and CG137-12 Industrial Engines Catalytic Converter Pressure - Test
3600 Distillate Fuel Engines Fluid Recommendations
C7.1-XQ230 Rental Generator Set Turbocharger - Inspect