2010/12/08 Caterpillar


An Improvement has been Made to Reduce the Amount of Radial Play of the Front Linkage Pin on Certain Excavators {6501, 6502, 6513}

Usage:

325D L A3R
Excavator:
311D (S/N: CLA1-UP; AKW1-UP; DDW1-UP)
312D (S/N: JBC1-UP; KCD1-UP; RKF1-UP; PHH1-UP; FBJ1-UP; DLP1-UP; HCW1-UP; HJX1-UP; TGY1-UP)
314D (S/N: BYJ1-UP; MFK1-UP; PDP1-UP; SBP1-UP)
315D (S/N: KBD1-UP; TLE1-UP; NCM1-UP; CJN1-UP)
319D (S/N: BZH1-UP; KTJ1-UP; WBJ1-UP; DAY1-UP; ZGZ1-UP)
320D (S/N: FNA1-UP; DFB1-UP; ZGB1-UP; MDE1-UP; TAE1-UP; A6F1-UP; A8F1-UP; A9F1-UP; KGF1-UP; MGG1-UP; DHK1-UP; FXK1-UP; XCK1-UP; FAL1-UP; GKL1-UP; RBL1-UP; CWN1-UP; WBN1-UP; WJN1-UP; BWP1-UP; BZP1-UP; AMR1-UP; AZR1-UP; PDS1-UP; SNS1-UP; YDS1-UP; DFT1-UP; EBT1-UP; BWW1-UP; SCW1-UP; CXY1-UP; EBY1-UP; BWZ1-UP; JFZ1-UP)
321D (S/N: PBD1-UP; KBH1-UP; NAS1-UP; MDT1-UP; JCX1-UP)
323D (S/N: RAC1-UP; SDC1-UP; WGC1-UP; CYD1-UP; SED1-UP; YSD1-UP; NDE1-UP; PBE1-UP; JLG1-UP; LFL1-UP; BYM1-UP; PBM1-UP; DKW1-UP)
324D (S/N: LAB1-UP; EJC1-UP; T2D1-UP; BYE1-UP; JJG1-UP; ECH1-UP; SYM1-UP; AWN1-UP; DFP1-UP; JZR1-UP; CJX1-UP)
325D (S/N: GPB1-UP; NAC1-UP; KBE1-UP; PKE1-UP; KDG1-UP; C4H1-UP; DBH1-UP; PEH1-UP; ERK1-UP; RJK1-UP; LAL1-UP; MCL1-UP; PAL1-UP; CJM1-UP; AZP1-UP; DAP1-UP; A3R1-UP; GBR1-UP; SCR1-UP; T2S1-UP; CYW1-UP)
328D (S/N: BYH1-UP; GTN1-UP; MKR1-UP)
329D (S/N: MNB1-UP; BFC1-UP; BBF1-UP; DJF1-UP; JHJ1-UP; RSK1-UP; WDK1-UP; TPM1-UP; BYS1-UP; LFW1-UP; SCY1-UP; TAY1-UP)
330D (S/N: RDA1-UP; KAB1-UP; GBC1-UP; PFC1-UP; NBD1-UP; R2D1-UP; GGE1-UP; NEF1-UP; B6H1-UP; EAH1-UP; LCJ1-UP; THJ1-UP; C5K1-UP; FFK1-UP; PCK1-UP; RDK1-UP; PEL1-UP; JJM1-UP; LEM1-UP; LRM1-UP; ERN1-UP; JLP1-UP; MWP1-UP; LDR1-UP; HAS1-UP; RAS1-UP; EDX1-UP; MEY1-UP; T2Y1-UP)
336D (S/N: SKE1-UP; JBF1-UP; J2F1-UP; PRF1-UP; KDJ1-UP; W3K1-UP; MPL1-UP; MYP1-UP; JER1-UP; DTS1-UP; NLS1-UP; JBT1-UP; KKT1-UP; M4T1-UP; WET1-UP)
345D (S/N: BYC1-UP; RGD1-UP; RAE1-UP; YEE1-UP; RGG1-UP; EEH1-UP; KFH1-UP; RAJ1-UP; MLK1-UP; NLM1-UP; JKN1-UP; L5R1-UP; PBT1-UP; LKY1-UP)
Mobile Hydraulic Power Unit:
312D MHPU (S/N: DXH1-UP)
315D MHPU (S/N: HLG1-UP)
319D MHPU (S/N: KTJ1-UP)
320D MHPU (S/N: PRR1-UP; GPX1-UP)
323D MHPU (S/N: DCJ1-UP; GRL1-UP; GRN1-UP; DCY1-UP)
324D MHPU (S/N: KJR1-UP)
325D MHPU (S/N: SRC1-UP; C3N1-UP; H3N1-UP; X3N1-UP)
328D MHPU (S/N: JTC1-UP)
329D MHPU (S/N: J9D1-UP)
330D MHPU (S/N: D3D1-UP; H3D1-UP; M3D1-UP; GMN1-UP)
336D MHPU (S/N: J6D1-UP)
345D MHPU (S/N: P5D1-UP)

Improvements have been made to the area of the front linkage pins. The diameter of the bracket bore fixed with pin has been reduced 0.09 mm (0.0035 inch) from the current diameter. The smaller diameter will reduce the amount of radial play in the front. Refer to Illustration 1 for a location of the pins. The improvements are effective with the February, 2011 production.




Illustration 1g02351703

One piece boom joints




Illustration 2g02352145

Variable angle boom joints

Caterpillar Information System:

312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Pressure Switch (Refrigerant Pressure Cutoff)
C15 and C18 Industrial Engines Pistons and Connecting Rods - Remove and Install
C27 and C32 Engines Exhaust Elbow - Remove and Install - Clean Emissions Module Inlet
3516B Marine Auxiliary Engine Cat Data Link - Test
C3.4B Industrial Engine Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C7.1 (Mech) Industrial Engine Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C7.1 (Mech) Industrial Engine Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
XQP150 Rental Generator Set Belts - Inspect/Adjust/Replace
C27 and C32 Engines for Caterpillar Built Machines Piston and Rings
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Flow Limit Valves
C13 Tier 4 Final Engines Air Cleaner
C13 Tier 4 Final Engines Air Cleaner
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Outlet Pressure
Installing an Automatic Stationary Regeneration Switch on Certain On-highway Engines{108F, 7332} Installing an Automatic Stationary Regeneration Switch on Certain On-highway Engines{108F, 7332}
C27 Petroleum Engine Inlet and Exhaust Valve Springs - Remove and Install
C4.4 Industrial Engine Aftercooler Core - Inspect
CG137-08 and CG137-12 Industrial Engines Electronic Control System Components
CG137-08 and CG137-12 Industrial Engines Electrical Connectors
2010/12/20 A New Flange Is Used for the Water Lines Group on C175-16 Generator Set Engines {1355, 1380, 1393}
3516B Marine Auxiliary Engine Speed/Timing - Test
CG137-08 and CG137-12 Industrial Engines Electronic Control Module (ECM)
320E and 323E Excavators Hydraulic System Final Drive
C9 On-highway Engines Air Compressor - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.