Fuel Pressure Regulator - Remove and Install
Start By:
- Remove the Exhaust Sensor Lines.
- Turn the fuel supply to the Off position.
Show/hide table
Illustration 1 g02260653 View from above the engine looking down onto the fuel pressure regulator. The fuel pressure regulator is mounted to the left side inlet manifold. - Remove clamp assembly (1) and remove tube assembly (3).
- Disconnect hose assemblies (2), (4), and (5).
Show/hide table
Illustration 2 g02260673 - Remove bolts (7) and remove the fuel pressure regulator (6).
Show/hide table
Illustration 3 g02260694 - Remove check valves (8) from manifold (6).
Show/hide table
Illustration 4 g02260717 - Remove O-ring seal (10) from check valve (9). Remove backup ring (11) and O-ring seal (12) from check valve (9). Repeat this step for the other check valve.
- Install the fuel pressure regulator (6) in the reverse order.
- Tighten check valves (8) to a torque of
28 ± 3 N·m (21 ± 2 lb ft) .
- Tighten check valves (8) to a torque of
Caterpillar Information System:
C27 and C32 Industrial Engines Fuel Transfer Pump - Remove and Install
C27 Petroleum Engine Fuel Pressure Sensor - Remove and Install - Filter Bypass
C7.1 (Mech) Industrial Engine Vibration Damper - Check
C27 and C32 Industrial Engines Fuel Temperature Sensor - Remove and Install
C27 and C32 Industrial Engines Fuel Pressure Sensor - Remove and Install
3512C HD Locomotive Engine Plate Locations and Film Locations
C27 and C32 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
349F and 352F Excavators System Pressure Release
320E and 323E Excavators Swing Bearing - Lubricate
3516B HD Generator Set Engine Oil and Filter - Change
C13 Tier 4 Final Engines Fuel Pressure Regulator
C15 Petroleum Generator Set Engines Piston and Rings
3512C HD Locomotive Engine Engine Electronics
C27 Generator Set Engines Magnetic Pickup
3512C HD Locomotive Engine Gauges and Indicators
3512C HD Locomotive Engine Cooling System Coolant Sample (Level 1) - Obtain
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Remove and Install
320E and 323E Excavators Stopping the Engine
3512C HD Locomotive Engine Engine Oil Sample - Obtain
C27 and C32 Industrial Engines Valve Mechanism Cover - Remove and Install
C1.5 and C2.2 Industrial Engines Electrical System
C6.6 Industrial Engine Engine Oil Filter Base - Remove and Install - Engine Oil Filter Base with Adapter
C4.4 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "B"
C4.4 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"