Fuel Pressure Sensor - Remove and Install - Filter Bypass
- Turn the fuel supply valve to the OFF position.
- Disconnect harness assembly (1).
- Remove fuel filter by-pass pressure switch (2) from the fuel filter base.
- Remove the O-ring seal from fuel filter by-pass pressure switch (2).
Show/hide table
Illustration 1 | g02259933 |
- Install the fuel filter by-pass pressure switch (2) in the reverse order.
Caterpillar Information System:
C7.1 (Mech) Industrial Engine Vibration Damper - Check
C27 and C32 Industrial Engines Fuel Temperature Sensor - Remove and Install
C27 and C32 Industrial Engines Fuel Pressure Sensor - Remove and Install
3512C HD Locomotive Engine Plate Locations and Film Locations
C27 and C32 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
349F and 352F Excavators System Pressure Release
320E and 323E Excavators Swing Bearing - Lubricate
3516B HD Generator Set Engine Oil and Filter - Change
C13 Tier 4 Final Engines Fuel Pressure Regulator
C15 Petroleum Generator Set Engines Piston and Rings
C7.1 Engines for Caterpillar Built Machines Connecting Rod - Inspect
C3.3 and C4.4 Generator Sets Product Installation
C27 and C32 Industrial Engines Fuel Transfer Pump - Remove and Install
C27 and C32 Industrial Engines Fuel Pressure Regulator - Remove and Install
3512C HD Locomotive Engine Engine Electronics
C27 Generator Set Engines Magnetic Pickup
3512C HD Locomotive Engine Gauges and Indicators
3512C HD Locomotive Engine Cooling System Coolant Sample (Level 1) - Obtain
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Remove and Install
320E and 323E Excavators Stopping the Engine
3512C HD Locomotive Engine Engine Oil Sample - Obtain
C27 and C32 Industrial Engines Valve Mechanism Cover - Remove and Install
C1.5 and C2.2 Industrial Engines Electrical System
C6.6 Industrial Engine Engine Oil Filter Base - Remove and Install - Engine Oil Filter Base with Adapter