3512C HD Locomotive Engine Caterpillar


Safety Messages

Usage:

3512C NJT
There may be several specific safety messages on your engine. The exact location and a description of the messages are reviewed in this section. Become familiar with all of the messages.

Ensure that all of the messages are legible. Clean the messages or replace the messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap for cleaning the messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. The messages that are loosened could drop off the engine.

Replace any message that is damaged or missing. If a message is attached to a part of the engine that is replaced, install a new message on the replacement part. Your Cat dealer can provide new messages.

------ WARNING! ------

Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.


Do not operate or work on the engine unless the instruction and warnings in the Operation and Maintenance Manual are understood. Failure to follow the instructions or failure to heed the warnings could result in injury or death. Proper care is your responsibility.



Illustration 1g02258509


Illustration 2g02258510

Universal Message (1)



Illustration 3g01370904

This safety message is located on the valve cover base on each side of the engine.

------ WARNING! ------

Do not operate or work on this product unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.


Hot Surface (2)



Illustration 4g01372256

This safety message is located on the valve covers on each side of the engine.

------ WARNING! ------

Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.


Vapor Explosion (3)



Illustration 5g01407639

This safety message is located on the ends of the fuel filters.

------ WARNING! ------

Warning: Vapor Explosion. Could cause serious injury or death. Read the Operation and Maintenance Manual before conducting any maintenance on the duplex fuel filter.


Vapor Explosion (4)



Illustration 6g01407639

This safety message is located on the ends of the oil filters.

------ WARNING! ------

Warning: Vapor Explosion. May cause serious injury or death. Read the Operation and Maintenance Manual before conducting any maintenance on the duplex oil filter.


Caterpillar Information System:

C7.1 (Mech) Industrial Engine V-Belt - Test
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Receiver-Dryer
C7.1 (Mech) Industrial Engine Cylinder Head - Inspect
C7.1 (Mech) Industrial Engine Connecting Rod Bearings - Inspect
C7.1 Engines for Caterpillar Built Machines Valve Guide - Inspect
C7.1 Engines for Caterpillar Built Machines Valve Depth - Inspect
C7.1 (Mech) Industrial Engine Engine Valve Lash - Inspect/Adjust
C7.1 (Mech) Industrial Engine Compression - Test
C7.1 (Mech) Industrial Engine Turbocharger - Inspect
C7.1 (Mech) Industrial Engine General Information
C15 and C18 Tier 4 Final Engines Cleanliness of Fuel System Components
C7.1 (Mech) Industrial Engine Air Inlet and Exhaust System
C7.1 (Mech) Industrial Engine Main Bearings - Inspect
C15 and C18 Petroleum Generator Sets Fluid Recommendations
C3.3 and C4.4 Generator Sets Product Installation
C7.1 Engines for Caterpillar Built Machines Connecting Rod - Inspect
C15 Petroleum Generator Set Engines Piston and Rings
C13 Tier 4 Final Engines Fuel Pressure Regulator
3516B HD Generator Set Engine Oil and Filter - Change
320E and 323E Excavators Swing Bearing - Lubricate
349F and 352F Excavators System Pressure Release
C27 and C32 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
3512C HD Locomotive Engine Plate Locations and Film Locations
C27 and C32 Industrial Engines Fuel Pressure Sensor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.