V-Belt - Test
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 144-0235 | 皮带张力计 | 1 |
Show/hide table
| 皮带张紧度表 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 皮带尺寸 | 皮带宽度 | 仪表读数 | |||||||
| 初始皮带张力(1) | 旧皮带张力(2) | ||||||||
| 1/2 | |
|
|
||||||
| 测量皮带张力。 | |||||||||
Show/hide table
| (1) | 初始皮带张力是指新皮带。 |
| (2) | 旧皮带张力是指已在额定转速下工作不低于 30 分钟的皮带。 |
将工具 (A) 安装在皮带最大自由长度的中心位置，并检查两条皮带的张力。 检查并调整最紧皮带的张力。 如需调整皮带张力，请参阅拆解和组装, "交流发电机 - 安装"。
Caterpillar Information System:
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Receiver-Dryer
C7.1 (Mech) Industrial Engine Cylinder Head - Inspect
C7.1 (Mech) Industrial Engine Connecting Rod Bearings - Inspect
C7.1 Engines for Caterpillar Built Machines Valve Guide - Inspect
C7.1 Engines for Caterpillar Built Machines Valve Depth - Inspect
C7.1 (Mech) Industrial Engine Engine Valve Lash - Inspect/Adjust
C7.1 (Mech) Industrial Engine Compression - Test
C7.1 (Mech) Industrial Engine Turbocharger - Inspect
C7.1 (Mech) Industrial Engine General Information
C15 and C18 Tier 4 Final Engines Cleanliness of Fuel System Components
C7.1 (Mech) Industrial Engine Air Inlet and Exhaust System
C7.1 (Mech) Industrial Engine Basic Engine
3512C HD Locomotive Engine Safety Messages
C7.1 (Mech) Industrial Engine Main Bearings - Inspect
C15 and C18 Petroleum Generator Sets Fluid Recommendations
C3.3 and C4.4 Generator Sets Product Installation
C7.1 Engines for Caterpillar Built Machines Connecting Rod - Inspect
C15 Petroleum Generator Set Engines Piston and Rings
C13 Tier 4 Final Engines Fuel Pressure Regulator
3516B HD Generator Set Engine Oil and Filter - Change
320E and 323E Excavators Swing Bearing - Lubricate
349F and 352F Excavators System Pressure Release
C27 and C32 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
3512C HD Locomotive Engine Plate Locations and Film Locations