374F Excavator Caterpillar


Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped

Usage:

374F L AP4

------ VÝSTRAHA! ------

Horký olej a horké součásti mohou způsobit úraz. Vyvarujte se styku pokožky s horkým olejem nebo horkými součástmi.


  1. Zaparkujte stroj na vodorovném povrchu.

  2. Umístěte stroj do servisní polohy.

  3. Ovládací páku blokování hydraulického systému dejte do polohy UZAMKNUTO. Vypněte motor.

  4. Zvolna povolte zátku plnicího otvoru, aby se uvolnil veškerý tlak.

  5. Po vypuštění tlaku utáhněte zátku plnicího otvoru.

  6. Otevřete přístupový kryt na pravé straně stroje. Filtr se nachází v blízkosti hydraulické nádrže.


    Ilustrace 1g02175170

  7. Demontujte čtyři šrouby (1) a víko (2) z filtru jemné filtrace.

  8. Vyjměte filtrační vložku (3 ) ze sestavy filtru.

  9. Nainstalujte novou filtrační vložku.

  10. Nasaďte kryt (2) a našroubujte čtyři šrouby (1).

  11. Zavřete přístupová dvířka.

Caterpillar Information System:

C27 and C32 Generator Set Engines Cylinder Block
2010/06/04 Starting Instructions and Diagnostic Procedure for Certain C7 Engines That Are Used in RoadTec Pavers {1000}
C4.4 Industrial Engine Belt - Inspect
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Turbocharger - Inspect
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fumes Disposal Filter Element - Replace - Open Crankcase Ventilation (OCV) Filter
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Column - Remove and Install
C175-16 Engine Overhaul (Major)
C175-16 Engine Overhaul (Top End)
C175-16 Engine Overhaul (In-Frame)
Installation and Initial Start-Up Procedure for G3512B ULB Engine{1000} Installation and Initial Start-Up Procedure for G3512B ULB Engine{1000}
325 VM and VH Variable Gauge Undercarriage Travel Motor - Remove and Install - VM Undercarriage
325 VM and VH Variable Gauge Undercarriage Final Drive - Remove and Install - VM Undercarriage
797F and 797F XQ Off-Highway Trucks Machine Systems Pump Drive Shaft (Hydraulic) - Remove and Install
C175-16 Generator Set Engine Oil and Filter - Change
797F and 797F XQ Off-Highway Trucks Machine Systems Lubrication Pump (Automatic) - Remove and Install
2010/06/15 An Improved Piston Is used on 3500 Remanufactured Engines {1225}
2010/06/25 Improved Piston used on 3500 Remanufactured Engines {1225}
320 VH and VM Variable Gauge Undercarriage Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
320 VH and VM Variable Gauge Undercarriage Recoil Spring - Disassemble
320 VH and VM Variable Gauge Undercarriage Recoil Spring - Assemble
C4.4 (Mech) Marine Generator Set MCS-3 Engine Crankcase Breather - Replace - Turbocharged Engines and Naturally Aspirated Engines
797F and 797F XQ Off-Highway Trucks Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
C4.4 (Mech) Marine Generator Set MCS-3 Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
797F and 797F XQ Off-Highway Trucks Machine Systems Relay Valve (Air Start) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.