Travel Motor - Remove and Install - VM Undercarriage
Removal Procedure
- Use two people in order to remove cover (2). The weight of cover (2) is approximately 30 kg (65 lb). Remove bolts (1) and cover (2) .
Show/hide table
Illustration 1 | g02162144 |
- Disconnect hose assembly (5). Remove bolts (3) and repostion valve assembly (4). Remove bolts (7) .
Show/hide table
Illustration 2 | g02162184 |
- Remove travel motor (6). The weight of travel motor (6) is approximately 34 kg (75 lb).
Installation Procedure
Install the travel motor (6) in the reverse order as the removal.
Caterpillar Information System:
325 VM and VH Variable Gauge Undercarriage Final Drive - Remove and Install - VM Undercarriage
2010/06/10 Button Plugs Are Available For EMCP 3 Control Panel On C175-16 Generator Set {4490, 7451, 7555}
320 VH and VM Variable Gauge Undercarriage Travel Motor - Remove and Install - VH Undercarriage
2010/07/30 Improved Operation Of Control Panel Door On C175-16 Generator Set {4490, 7451}
C4.4 Industrial Engine Crankcase Breather
320 VH and VM Variable Gauge Undercarriage Final Drive - Remove and Install - VH Undercarriage
C27 Generator Set Engines Injector Solenoid - Test
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Cooling System Coolant Extender (ELC) - Add
C13, C15, and C18 Tier 4 Interim Engines Engine Misfires, Runs Rough or Is Unstable
C27 and C32 Tier 4 Engines Air Lines - NRS
3500 Generator Sets Battery - Replace
3500 Generator Sets with Dynamic Gas Blending Air Inlet Filter - Inspect/Clean/Test - Engine Air Inlet Filter
Installation and Initial Start-Up Procedure for G3512B ULB Engine{1000} Installation and Initial Start-Up Procedure for G3512B ULB Engine{1000}
C175-16 Engine Overhaul (In-Frame)
C175-16 Engine Overhaul (Top End)
C175-16 Engine Overhaul (Major)
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Column - Remove and Install
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fumes Disposal Filter Element - Replace - Open Crankcase Ventilation (OCV) Filter
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Turbocharger - Inspect
C4.4 Industrial Engine Belt - Inspect
2010/06/04 Starting Instructions and Diagnostic Procedure for Certain C7 Engines That Are Used in RoadTec Pavers {1000}
C27 and C32 Generator Set Engines Cylinder Block
374F Excavator Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped
797F and 797F XQ Off-Highway Trucks Machine Systems Pump Drive Shaft (Hydraulic) - Remove and Install